moregrip

iTrader: (8)

Went down to the San Diego fair today and checked out the chevrolet display....and I realized how much I like the SS body cladding. Anyone done this swap? and does anyone have part numbers in victory red?
peace!

03Screamer

iTrader: (1)

I'm doing the front bumper conversion using factory GM SS parts, it should be out of the body shop by next Friday. Not sure if this is of any help, but the non painted bumper cover that I got was part number 12335659. To do a full body conversion is A LOT of money btw. Just for the front bumper conversion I spent over 600 bucks. If you did all the rocker panels, bumpers, and front grille, I wouldn't be suprised if it was close to 3 grand or more. Good luck!

moregrip

iTrader: (8)

what else besides the factory bumper cover did you need to complete the job?

03Screamer

iTrader: (1)

I'm not sure as of yet if I will need more parts, but so far I've got the bumper cover, ducts on each side, the middle grille, liscense plate attachment, filler peice, and misc. screws. I'll let you know next week if there are anymore parts involved. I think that should cover it though...I hope since it's already cost too much lol.

moregrip

iTrader: (8)

thanks 03 Screamer! appreciate the help

revolution

front bumper:

http://www.fullsizechevy.com/Chachi/

rear: ???

moregrip

iTrader: (8)

thanks revolution, great link! when I was checking out the SS at the fair it seemed to have some sturdier brackets (at least toward the outer edges). Can anyone confirm this? or are people using the stock bumper brackets? or is there no diff?

tdrumm

iTrader: (18)

89038688 Sport Wheel kit (P30 option) 20x8.5”
15197885 Sport Wheel hubcap
12335659 Front bumper fascia (unpainted)
12335660 Rear bumper fascia (unpainted)
12335692 Rear bumper fascia upper step pad
15197888 Rear bumper impact bar
18045936 Rear disc brake pads
12335767 Front left brake caliper duct
12335766 Front right brake caliper duct
12335769 Radiator grille emblem
15178666 Name plate (SS emblem) need 3 total
1 for pickup box end-gate
1 for each door
15192457 Muffler with exhaust and tailpipe
15178226 Left front fender lower rear molding unpainted
15178227 Right front fender lower rear molding unpainted
88979994 Driver side door lower molding unpainted
88979995 Passenger side door lower molding unpainted
88979996 Left side rear door lower molding unpainted
88979997 Right side rear door lower molding unpainted
15178226 Left rear of cab lower molding unpainted
15178227 Right rear of cab lower molding unpainted
88980187 Fender molding in front of rear wheel opening unpainted
88980188 Fender molding in front of rear wheel opening unpainted
88944467 Fender molding behind rear wheel opening unpainted
88980189 Fender molding behind rear wheel opening unpainted
15178282 End-gate molding for pickup box unpainted
88977071 Seat head restraint (head rest) pewter
88977070 Seat head restraint (head rest) neutral
15197873 End-gate pickup box Spoiler unpainted

This is going to be very expensive.

moregrip

iTrader: (8)

damn bro! thanks a million! you putting in the OT or what?

nekkid_hill_billy

you could get that **** from street scene...probally be alot cheaper otherwise id be looking for some wrecked ss trucks. b/c from gm new thats around 4 or 5 k