Project Kermit
Sep 13, 2009 | 02:28 PM
#771
Thread Starter
GFYS and STFU
iTrader: (8)
Joined: Jan 2007
Posts: 13,870
Likes: 4
From: Here and sometimes there too.
you might have to bleed them more i know i have the Z06 brakes on my truck and it took awhile a bleed the calipers i had to do it 4 times before the pedal felt not spongy. but there not hanging up anymore correct? what do you mean by jolty the brakes being jolty or the pedal being if its the peadal your referring to then its probably the ABS
As far as jolty I'm referring to the pedal so I'm assuming it's the ABS but I've never actually braked that hard before so I don't know if it's normal. She brakes damn hard thoough! Lol I think I need bigger meats though! Anyways, I'm gonna go jack the truck up again today and see which calipers are sticking...
Sep 14, 2009 | 04:15 AM
#774
Thread Starter
GFYS and STFU
iTrader: (8)
Joined: Jan 2007
Posts: 13,870
Likes: 4
From: Here and sometimes there too.
With the help of a friend I had just made some adjustments to my tune and went out to get a few logs and to go WOT for the first time and I thought it felt week and when I slowed back down it was backfiring pretty badly! So I log the drive back home backfiring all the way and when I got home I looked at the logs and my timing graph was as spikey as O2 sensors graph usually are. At part throttle I was seeing negative timing!! 
So first guess is that I have some loose coil pack wires. Was also suggested to make sure that one of my O2 plugs didn't work itself loose. I'll take a look at it tomorrow when I get home from the port. I might of lost one whole bank and was driving around with an inline 4!! Woohoo.
So first guess is that I have some loose coil pack wires. Was also suggested to make sure that one of my O2 plugs didn't work itself loose. I'll take a look at it tomorrow when I get home from the port. I might of lost one whole bank and was driving around with an inline 4!! Woohoo.
Sep 14, 2009 | 04:19 AM
#775
Thread Starter
GFYS and STFU
iTrader: (8)
Joined: Jan 2007
Posts: 13,870
Likes: 4
From: Here and sometimes there too.
Hopefully it's nothing major
Sep 14, 2009 | 12:15 PM
#777
im kinda the same way but i start to get mad when stuff keeps going wrong and doesnt stop ****** up like my rearend had a shop setup my gears and what happens it sounds like a 747 takin off had it fixed and what happens one of the teeth broke off and had to get it fixed again
