Originally Posted by yurs78

Congratulations!!!!! You are, without question, the most patient and meticulous person I've ever known. I feel very fortunate for the opportunity to follow this well doccumented and detailed build. I hope you enjoy every second of driving.

Originally Posted by 1Bear

Congratulations Moregrip!!! Damn I'm so used to coming to this thread, I won't know what to do now.

Originally Posted by moregrip

My big install is just around the corner now, as some of you know, it's been almost 2 yrs in the making. I did my best, with the help of a few experts, in choosing a well thought out combination/package. Cam specs have changed 100 times, and I've had no less than 3 cams in my possession, all uninstalled.

So in keeping with my goals and engine parameters, the basic spec is as follows.

-Heads, WCCH 035 Stage 2's, 73.5cc, 2.02 1.57 (roughly 9.0-1 CR w/stock Head Gaskets)
-Cam, EDC(Flowtech), 224/236 .600/.590 @ 116LSA (powerband is 2000-6400 rpm on a 346-364ci engine)
-Connecting Rods, Stock w/LPE rod bolts (same as Katech)
-Rocker Arms, Stock
-Lifters, Stock
-Pushrods- Comp Cams 7.4
-Timing Chain- Comp Cams adjustable single roller ( I will be degreeing the Cam)
-Blower, Magnuson MP122HH @ 10lbs of boost

The exhaust system is already installed, SW 1 3/4, 3" collectors, Magnaflow 3" dual out the back.

On the DynoSim Software this combo is making between 750-850fwhp/fwtq, depending on boost levels, 10-14psi range. Peak TQ occurring @ 2000-2500rpm, Peak HP occurring @ 6000rpm (extending to 6500rpm). Obviously that's not a reality yet so I will be sure to post results as the combination is tested in the appropriate sections.

Anyone interested in progress pictures during the install?