Forums - View Profile: 1Bear

1Bear 1Bear is offline

TECH Fanatic

Visitor Messages

Showing Visitor Messages 1 to 2 of 2
  1. fastnblu
    09-07-2010 03:25 PM - permalink
    Thought I'd pass along somethin another member on PT sent me:

    "I used comp 1.75 roller rockers but would have stayed with stock rockers and saved $400 if I had to do it over again. Stock rockers are fine for these smaller cams and a lot easier to install as well. Also I had to modify the under side of my rocker covers to fit the comp rockers. They say in the ads that they will fit under stock covers but they don't tell you that is only after you have milled off the casting dimples (both sides) and remove the PCV shroud on the pass. side cover. I believe you have the return style fuel system so this will make your install a lot easier too."

  2. fastnblu
    09-06-2010 02:45 PM - permalink
    Light at the end of the tunnel. I can't thank u enough, my friend. I wish we lived closer, we could shoot the breeze & I could help u cut grass.

    I got a few things left:oil pickup tube o-ring (red BTW), R&R valve seals, w/o damaging. Not sure I need a J-tool or can slide w/. a socket of similiar size.

About Me

  • About 1Bear
    Jones Creek, Texas
  • Signature
    2001 "Pewter" C
    12.04 @ 110.38mph, 1.67 60ft. Maggie W/2.8
    11.67 @ 117.49mph, 1.64 60ft. W/75 Shot
    2012 GMC Canyon SLT 2wd Off-Road Pkg. Crew-Cab 6.2L
    2016 Charger SRT 392 (1 of 113 B5 Blue Pearlcoat)


Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: 02-25-2018 03:14 PM
  • Join Date: 08-23-2006


Showing Friends 1 to 5 of 5

All times are GMT -5. The time now is 03:41 PM.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.