Cammed 4.8 street truck
#1
Cammed 4.8 street truck
I have a 2008 rwd single cab gmc 4.8. Currently the engine is out and awaiting the ls thumper cam kit from comp cams (duration at 050 218int/229exh, lobe separation 111)
along with schoenfield headers, and high performance gasket kit.
My objective with the truck is to get off the line faster, as it is no longer a daily!
curious if anyone has suggestions for what the truck will need and what I can leave stock after this motor goes in??
(suspension, rear axle, driveshaft, transmission,etc?)
ps: future plans to swap from my 4l60e to a 4l80e transmission after summer.
truck currently has 101,000km
thanks
along with schoenfield headers, and high performance gasket kit.
My objective with the truck is to get off the line faster, as it is no longer a daily!
curious if anyone has suggestions for what the truck will need and what I can leave stock after this motor goes in??
(suspension, rear axle, driveshaft, transmission,etc?)
ps: future plans to swap from my 4l60e to a 4l80e transmission after summer.
truck currently has 101,000km
thanks
#2
On The Tree
Gears: 4.10's will make a huge difference.
The following users liked this post:
3wide (04-15-2022)
Thread
Thread Starter
Forum
Replies
Last Post
cantbuytime79
GM Engine & Exhaust Performance
19
10-23-2021 05:22 PM
RickyMartinZ28
GM Engine & Exhaust Performance
12
05-22-2010 01:36 AM