Supercharging crew cab z71
Mar 25, 2018 | 07:44 PM
#1
Thread Starter
Registered User
Joined: Mar 2018
Posts: 1
Likes: 0
Supercharging crew cab z71
I have a 2006 crew cab Z and I知 wanting to put a supercharger, cam, heads and built trans in the truck. Any pointers or where I can find good stuff, what to use, I知 new to the LS world, always dealt with old school small blocks.
Mar 25, 2018 | 08:05 PM
#2
Magnuson TVS 1900 or 2300.
Throw the 4L60e in the trash and swap straight to a 4L80e that can actually handle the power.
Camshaft opens a ton of doors, your power goals need to be known to give any suggestions there.
Cylinder heads too, if you already have 243/799 heads leave them alone they are the best flowing stock heads out there.
Don't forget the larger fuel pump you will need. Think Walbro 450 with regulator that will do 500-600hp+ on pump gas.
Throw the 4L60e in the trash and swap straight to a 4L80e that can actually handle the power.
Camshaft opens a ton of doors, your power goals need to be known to give any suggestions there.
Cylinder heads too, if you already have 243/799 heads leave them alone they are the best flowing stock heads out there.
Don't forget the larger fuel pump you will need. Think Walbro 450 with regulator that will do 500-600hp+ on pump gas.
Thread
Thread Starter
Forum
Replies
Last Post
ang3l
GMT 800 & Older GM General Discussion
29
Sep 16, 2010 01:58 AM
chris04
Trucks and SUV Classifieds
8
May 8, 2010 05:58 PM
thunder550
Ford Engine & Exhaust Performance
3
May 3, 2007 04:29 PM