New idle vid, LQ9 220/224@115
#1
Thread Starter
Resident Retard
iTrader: (31)
Joined: Jan 2006
Posts: 17,216
Likes: 20
From: Fort Worth - TX
Sorry for the crappy vid but it is all i have. It is idling around 750 cause i am still working on the tune. With a few adjustments i should have the idle stable at 625ish.
http://i27.photobucket.com/albums/c1..._220_224_2.mp4
http://i27.photobucket.com/albums/c1..._220_224_2.mp4
#2
Sorry for the crappy vid but it is all i have. It is idling around 750 cause i am still working on the tune. With a few adjustments i should have the idle stable at 625ish.
http://i27.photobucket.com/albums/c1..._220_224_2.mp4
http://i27.photobucket.com/albums/c1..._220_224_2.mp4
I figured you'd be running a lower LSA.
Sounds goooood
#3
Thread Starter
Resident Retard
iTrader: (31)
Joined: Jan 2006
Posts: 17,216
Likes: 20
From: Fort Worth - TX
Ya. I wanted something a little different this time. I have always had cams with lower LSAs in my 4.8. I am sure i will end up swapping out the came sometime cause well that is just how I am.
#5
Thread Starter
Resident Retard
iTrader: (31)
Joined: Jan 2006
Posts: 17,216
Likes: 20
From: Fort Worth - TX
The power is night and day. I am having issues goin wot. 1st is useless, 2nd starts spinning the tires at 6omph when the timing hits 28* and that is with TM and burt KR in the tune. I really need new tires. DDing the truck is very smooth and effortless due to the nice CircleD TC. All in all i am happy with it for now.
Trending Topics
#8
Thread Starter
Resident Retard
iTrader: (31)
Joined: Jan 2006
Posts: 17,216
Likes: 20
From: Fort Worth - TX
Thanks. I am running stock 317s. The old PRCs were 58cc so that would have made the compression insane and i am inly interested in running stkck head gaskets. Eventually i plan on getting another set of PRCs



