lightning vs SSS
#1
Thread Starter
TECH Addict
iTrader: (25)
Joined: Dec 2004
Posts: 2,913
Likes: 0
From: southern california
http://s23.photobucket.com/albums/b3...t=MOV03587.mp4
here is a horrible video i managed to get last friday. had some issues. the truck didnt want to shift 2-3 and i had to forfit the run. with my 4.10's and loose converter it caused some issues with commanded shift rpm .
the only cool thing is i hooked. no launch at all . off idle with the drag radials. i also tied my best 1/8th mile time.
this is my 10.7 run , look at the 1/8 e/t and mph

this was the fubar run vs the lightning ,

the time was almost identical but i trapped almost 20mph slower because i had let off so much sooner.
only mod changed was drag radials and meth nozzle relocation . also track d/a was around 300 feet and temp was mid 40's
3.73 and a lower stall to come.
here is a horrible video i managed to get last friday. had some issues. the truck didnt want to shift 2-3 and i had to forfit the run. with my 4.10's and loose converter it caused some issues with commanded shift rpm .
the only cool thing is i hooked. no launch at all . off idle with the drag radials. i also tied my best 1/8th mile time.
this is my 10.7 run , look at the 1/8 e/t and mph

this was the fubar run vs the lightning ,

the time was almost identical but i trapped almost 20mph slower because i had let off so much sooner.
only mod changed was drag radials and meth nozzle relocation . also track d/a was around 300 feet and temp was mid 40's
3.73 and a lower stall to come.
Last edited by 2004SSS; Feb 7, 2011 at 05:21 PM.
#7
Thread Starter
TECH Addict
iTrader: (25)
Joined: Dec 2004
Posts: 2,913
Likes: 0
From: southern california
no they were both correct . the 2nd one i posted was my 10.7 run where the trans shifted fine and i ran it out. the other is when it didnt shift and i had to let off early . my guess is the mph would have been the same has it shifted but .2-.4 faster in e/t
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
murderedSS
Tuning, Diagnostics, Electronics, and Wiring
27
Oct 12, 2015 11:13 AM





