Hey, I still trying to figure out which one best benfit for my truck. I was wondering if I go stick with LS6 Yellow valvespring since I planning to put 210/218 cam in my truck. What the rev rpm will change to? I know I need get 7.4 pushrods. What about roller rocket arm? Or I use my OEM rocker arm? Is Cam is good one for my truck for street/strip and I do tow sometimes though. Where is mostly cheaper $ for 7.4 pushrod?

 

well, those roller rockets are going to require a higher octane fuel, IMO. i would look for at least some 118 octane, i think regular rockets need like 115 octane, and the roller ones would be even higher.

 

What? Most gas station offer 93 ontace that what I always use. I want to know if I do need buy rocket or stay with my stock, And I am asking about valvesprings do you think LS6 yellowspring is good for me to use?

 

What's the lift on that cam, is it .551 (Vinci cam)? You should be fine with the yellow LS6 springs and stock rockers.

As for the octane matter in question, I think sickREDsierra was making a joke in reference to your "rockets" as opposed to "rockers"

 

Oh finish! I didnt know that he is joking with me lol. I just ask about rockers if I should to swap. Yes it come from Vinci Cam.

 

is English not your first language? (i'm not trying to be an *******)

 

Maybe he is def. My uncle has been def since he was a baby, he writes the same way. Not trying to be an *** either...

 

Yes I am deaf. I am writing English. But which is I cannot speak or hearing. Because I am deaf that mean I cant hear. Only can hear when things really loud. I lost hearing when I was 2 due bad sick.

 

Appericate for that. Good things you have some experince with deaf. Do you sign to him?

 

Did you have CMV?

Also, I have asked Roger Vinci via Email about this before.

He said the yellow LS6 springs would be okay if they were new if using one of his cams.

I was also looking at the 062 Vinci Cam.