advice on valve train for 6.0
May 17, 2016 | 05:50 PM
#14
May 17, 2016 | 08:52 PM
#15
Thread Starter
On The Tree
Joined: Sep 2015
Posts: 107
Likes: 2
From: Sulphur LA
Heres a link..... http://m.summitracing.com/parts/cca-...FYEehgodoIkPbw
Neal
May 18, 2016 | 12:44 PM
#16
On The Tree
Joined: Apr 2016
Posts: 103
Likes: 0
From: Fargo, ND
https://www.texas-speed.com/p-5213-t...s-engines.aspx
here is a link to the texas speed trunions. These are the ones i used and it took about 20 minutes in a bench vise. super easy and these are a little cheaper than the comp trunions
here is a link to the texas speed trunions. These are the ones i used and it took about 20 minutes in a bench vise. super easy and these are a little cheaper than the comp trunions
May 18, 2016 | 02:13 PM
#17
Thread Starter
On The Tree
Joined: Sep 2015
Posts: 107
Likes: 2
From: Sulphur LA
https://www.texas-speed.com/p-5213-t...s-engines.aspx
here is a link to the texas speed trunions. These are the ones i used and it took about 20 minutes in a bench vise. super easy and these are a little cheaper than the comp trunions
here is a link to the texas speed trunions. These are the ones i used and it took about 20 minutes in a bench vise. super easy and these are a little cheaper than the comp trunions
Neal
