Hello 12s!!! 2017 5.3 Z71 ProCharged
#13
TECH Apprentice
Thread Starter
Some more 12s today. Was hot out and thought I would not see 12 at all and the two passes I got in were both 12s. That's 12s at 2 different tracks now. Just the two passes this time. I had to leave for family stuff. Now just have to wait on cooler weather and see if I can get 12.6 out of the truck. Yes Headers in the future as well
1st pass: 12.95@105.02(1/4), 8.26@83.30(1/8) with a 1.85 60ft 85 degrees DA 2690
2nd pass: 12.92@104.21(1/4), 8.22@83.06(1/8) with a 1.80 60ft 85 degrees DA 2760
1st pass: 12.95@105.02(1/4), 8.26@83.30(1/8) with a 1.85 60ft 85 degrees DA 2690
2nd pass: 12.92@104.21(1/4), 8.22@83.06(1/8) with a 1.80 60ft 85 degrees DA 2760
#15
TECH Apprentice
Thread Starter
#16
TECH Junkie
iTrader: (40)
Congrats that's sweet man
I had a set of Speed Engineering's headers in my hands Saturday and I was leaning toward them or Texas Speed headers, after seeing Speed Engineering's I see no reason to spend extra money on anyone else's headers. They were made very very nicely, also a big concern of mine is flanges on headers. The flanges were very thick (was in a hurry didn't measure probably 3/8" at least) so when it comes time for me to get headers, that's what I'll be getting.
I had a set of Speed Engineering's headers in my hands Saturday and I was leaning toward them or Texas Speed headers, after seeing Speed Engineering's I see no reason to spend extra money on anyone else's headers. They were made very very nicely, also a big concern of mine is flanges on headers. The flanges were very thick (was in a hurry didn't measure probably 3/8" at least) so when it comes time for me to get headers, that's what I'll be getting.
Thread
Thread Starter
Forum
Replies
Last Post
Gorske
GM Engine & Exhaust Performance
2
04-27-2017 10:21 PM