silver-mod-o

iTrader: (15)

Get the US standard gears from Rons Machine... Set them up right and save a few bucks. I've never had an issue and installed several sets.

LS1Aggie09

iTrader: (25)

think my gearset that broke in my fbody (granted an s10 rear end) was motive but still...happened on the street with a bolt-on 5.7.

AUTOT3K

iTrader: (3)

is there an ABS reluctor in these diffs? I didnt think so...I thought it was off the axle shafts kinda behind the drum?
Ive been looking at lots of different gear sets now that it seems nobody has had luck with motive and ive seen a couple mention "except ABS"

AUTOT3K

iTrader: (3)

I checked those out, and the $80 shipping...doesnt save me any money at all

2doorfury

iTrader: (12)

Shipping should be free from rons. Standard shipping is usually free then itll give you the options to upgrade shipping.

AUTOT3K

iTrader: (3)

its to Canada though
bend over on your way threw the border customs

AUTOT3K

iTrader: (3)

can anyone tell me about this abs reluctor? i'd hate to get halfway threw the job and discover I ordered the wrong ring gear set

SLCviaAK

If a rear differential has a reluctor on it, the carrier matters, not the gears themselves. And our trucks don't have reluctors in the center section. They have VSS in the trans/transfer case and ABS wires outboard on the shafts.

JCunningham

iTrader: (4)

that locker would put you in the ditch on snow ice covered roads

sand man

get a 9.5 and be done with it , or get the yukons, the best quality on the market these days