GMT 800 & Older GM General Discussion 2006 & Older Trucks | General Discussion

went to the trck friday (truck is slow)

Thread Tools
 
Search this Thread
 
Old May 16, 2005 | 04:11 PM
  #1  
TURBHOE's Avatar
Thread Starter
12 Second Truck Club
iTrader: (4)
 
Joined: Nov 2004
Posts: 6,318
Likes: 2
From: Jacksonville FL.
Default went to the trck friday (truck is slow)

best time was 16.0 at 84
worst was 18.8 at 83 with a 3.8 60' i screwed that one away.
can't wait to get my turbo on.
Reply
Old May 16, 2005 | 04:23 PM
  #2  
OrlandoFL4.8's Avatar
TECH Resident
iTrader: (1)
 
Joined: Oct 2004
Posts: 941
Likes: 0
From: Orlando
Default

Do you have any mods, what year truck do you have and is it extra or standard cab.....??
Reply
Old May 16, 2005 | 04:40 PM
  #3  
TURBHOE's Avatar
Thread Starter
12 Second Truck Club
iTrader: (4)
 
Joined: Nov 2004
Posts: 6,318
Likes: 2
From: Jacksonville FL.
Default

it a 4wd ext 2004 4.8l with 285/75r16 procomp xterrian's with free mods and a pipe inplace of the muffler and a little tunning with hp tunners.
Reply
Old May 16, 2005 | 04:49 PM
  #4  
FILE's Avatar
TECH Senior Member
iTrader: (5)
 
Joined: Apr 2002
Posts: 7,276
Likes: 1
From: Truck Heaven
Default

Not bad.... I wont 16.6 with my wife's 4.8 ext cab when it was stock.
Reply
Old May 16, 2005 | 05:13 PM
  #5  
TURBHOE's Avatar
Thread Starter
12 Second Truck Club
iTrader: (4)
 
Joined: Nov 2004
Posts: 6,318
Likes: 2
From: Jacksonville FL.
Default

in four high i ran a 16.8 i tried just a 2wd run but i've got the one wheel wonder so it kinda sit and spun then i let out and when i did it shift then i got back into it and it downshifted so i got a 18.8.
Reply
Old May 16, 2005 | 07:55 PM
  #6  
v8
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default

Well first off dont stall the trans so high lol hold it at 1000 rpms and then go that will help out alot.
Reply
Old May 16, 2005 | 08:08 PM
  #7  
TURBHOE's Avatar
Thread Starter
12 Second Truck Club
iTrader: (4)
 
Joined: Nov 2004
Posts: 6,318
Likes: 2
From: Jacksonville FL.
Default

i was just watching the lights go down and trying to stall it to where ever it would with the stock tc. my last and best run i just waited for the light and hammered it no stall. but that was in 4low. that was a blast didn't know my truck could spin tire in 4low but it sure as sheet did and pull a second gear bark it was great.
Reply
Old May 17, 2005 | 07:50 AM
  #8  
TECH Junkie
 
Joined: Mar 2003
Posts: 3,271
Likes: 0
From: Katy, TX
Default

It spun all 4 out of the whole with the 4-lo run. You got a 2.3 60' or something like that didnt you?
Reply
Old May 17, 2005 | 04:01 PM
  #9  
TURBHOE's Avatar
Thread Starter
12 Second Truck Club
iTrader: (4)
 
Joined: Nov 2004
Posts: 6,318
Likes: 2
From: Jacksonville FL.
Default

some where between 2.3 and 3.0 it was around there yeah. definatly never got below 2.0 on any of them.
Reply
Old May 17, 2005 | 04:02 PM
  #10  
TURBHOE's Avatar
Thread Starter
12 Second Truck Club
iTrader: (4)
 
Joined: Nov 2004
Posts: 6,318
Likes: 2
From: Jacksonville FL.
Default

it paused when i first launched that time in 4low it was a long enough pause for me to think "what the ****" then it tossed me back and ripped.
Reply



All times are GMT -5. The time now is 06:22 PM.