Titan rear window on Silverado
Mar 2, 2023 | 12:59 AM
#142
TECH Enthusiast
Joined: Aug 2015
Posts: 602
Likes: 141
From: Houston TX
Richard
Mar 2, 2023 | 09:25 AM
#143
Shlumpt
Joined: Nov 2019
Posts: 4,455
Likes: 1,527
From: Shlumpt, TX
Jun 23, 2024 | 05:46 PM
#146
Teching In
Joined: Jun 2024
Posts: 5
Likes: 1
Do not buy
Don't buy that pan from SIEMPRETUMBADO it's a waste of 300 bucks. First got it in the mail. Bent to all hell. Super thin metal. None of the tabs matched where it need to be mounted. I tried to bend everything back that I could to make it look decent. Put it in flexed when the window motor moved. Ended up going to the amish and had a 1/8 inch aluminum pan bent to fit.
Jun 23, 2024 | 06:42 PM
#147
Don't buy that pan from SIEMPRETUMBADO it's a waste of 300 bucks. First got it in the mail. Bent to all hell. Super thin metal. None of the tabs matched where it need to be mounted. I tried to bend everything back that I could to make it look decent. Put it in flexed when the window motor moved. Ended up going to the amish and had a 1/8 inch aluminum pan bent to fit.
Jun 24, 2024 | 11:33 AM
#150
Launching!
Joined: Oct 2020
Posts: 275
Likes: 121
From: Phx, Az
If you want, I can send you an install kit that includes the molding, primer, urethane, and cleaner required to install the window. I use all DOW Betaseal products.
I can include
2 tubes of u-428 urethane with Precut V-notch tips
1 can of 5504g Primer
1 can of GC800 Glass Cleaner
2x Primer Applicators
4x Single-sided Razorblades
15 ft of the t108 molding (should be 2.5x what you need)
Instructions and tips on how to properly replace the glass (not the inner regulator portion but the actual bond to the vehicle and prep work.)
only thing you’ll need is a good ratio caulking gun, not a cheap one because you’ll never push this urethane by hand with a low ratio geared gun, I use electric guns for work.
Can send it anywhere in the US. $30 plus shipping usps priority flat rate.
