Some ones Bullsh!ting!!
#22
This past weekend I went to the track,
R/T= .632
60'= 2.479
330= 6.773
1/8= 10.313
MPH=69.98
1000'= 13.376
1/4= 16.012
MPH= ?? MESSED UP
93 octane
R/T= .632
60'= 2.479
330= 6.773
1/8= 10.313
MPH=69.98
1000'= 13.376
1/4= 16.012
MPH= ?? MESSED UP
93 octane
#23
There is something definately wrong! I got a 99(Less HP than '00+) 5.3 ECSB and with headers,intake,exhaust,and bbk 80mm I ran a 15.40. Put the g80/3.73s and HPP3 and got 14.99 with a 2.276 60'.
Ultimategixxer1 is a member here and he has a FREAK 2002 ECSB that went 14.96 BONE STOCK!
You might wanna check out your tune or see what other trucks in your area are doing.
2.4 60'?
That is territory for 3.42 with open rear end.
Most 4.10s can pull 2.1 with good traction.
Ultimategixxer1 is a member here and he has a FREAK 2002 ECSB that went 14.96 BONE STOCK!
You might wanna check out your tune or see what other trucks in your area are doing.
2.4 60'?
That is territory for 3.42 with open rear end.Most 4.10s can pull 2.1 with good traction.
#24
That was with another person in my truck at about 280lbs so i figure about 3 tenths for that, and I also have 2 ten inch wolfers amp and stuff
#28
TECH Fanatic
Joined: Sep 2004
Posts: 1,288
Likes: 0
From: Somewhere between Auburn, AL and Columbus, GA
Originally Posted by DUNGBEETLE
and I also have 2 ten inch wolfers amp and stuff
#29
#30
Beeftip, I think its because you were in my car, and your **** are like sacks of beef, atleast 120lbs apiece.............ha



