Did the 4 high mod in about 15 minutes, worked like a charm, now I wanna know how I can make my fog lights work with my high beams? anyone?

99-02 only please

 

I have looked and so far I have not seen anyone that has done it.

 

im guessing when u hit the high beams it also sends power to a relay that opens the connection to the fog lights meaning its normally be closed always letting power flow to the lights, if this is the case and its done that way on its own relay you should be able to just cut the wire that goes from the high beam side of the switch to the fog light relay that way the relay would never know that the high beams are on. this is only if its wired that way..

if someone could get me some wiring diagrams i could easily give some directions on how to do it and make a DIY write-up on it.

 

i dont know if the 03-07 classic is different, if its not, then just run a diode from the 85 pin of the high beam relay to the 85 pin on the fog light relay, i have mine done so that everything comes on. highs, lows, fogs, and DRLs, it looks awesome

 

it is a different system, but I found my answer on fullsizechevy, here yas go for anyone else interested

http://www.fullsizechevy.com/forums/...d-98-02-a.html

 

Found this...

https://www.performancetrucks.net/fo...light+mod+%241

 

thats for 03+ trucks, thanks anyway man

 

didn't realize it was so easy to do with the 99-02 trucks...very sweet. i had always wanted to buy one of the kits for this, now i'll just make this mod. pretty sweet considering i just bought new hid's too...