GMT 800 & Older GM General Discussion 2006 & Older Trucks | General Discussion

Body Control Module..........

Thread Tools
 
Search this Thread
 
Old Nov 26, 2008 | 12:51 AM
  #11  
budhayes3's Avatar
PT's Slowest Truck
iTrader: (19)
 
Joined: Apr 2004
Posts: 17,863
Likes: 2
From: Hackensack, NJ
Default

Originally Posted by 2001c3driver
Thanks guys- I'll check all that out. Oh yeah- where's it located? I think I've seen it when I peered under the dash beneath the steering wheel but wanna be sure..............
Yep, it's on the driver's side under the dash
Reply
Old Nov 26, 2008 | 11:34 AM
  #12  
Mark Johnson's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,728
Likes: 29
From: Santa Fe New Mexico
Default

Thanks bud- I've got it out, or what I believe it to be. It's labled Pulrple Blue Brown for the connectores and reads a P/N 09375899 and a CWWC at the end. Anyways- I opened it up and nothing seems to be cooked or discolored- I'd take a pic but don't have the camera with me.I tried the headlights with the BCM out and they turn on maually, remember those days? Gonna plug it back in, anything else I should look for..................
Thanks again...............

Edit; plugged it back in, no changes.............

Last edited by Mark Johnson; Nov 26, 2008 at 01:20 PM.
Reply
Old Nov 28, 2008 | 09:30 AM
  #13  
Mark Johnson's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,728
Likes: 29
From: Santa Fe New Mexico
Default

OK- I think the conclusion here is a new BCM. B4 a new one I think I may have helped this one along to the grave by replacing the stock fog lights with some aftermarket units as the stockers were getting busted up all the time due to their positions. Can anyone substantiate that?
Reply
Old Nov 28, 2008 | 11:45 AM
  #14  
budhayes3's Avatar
PT's Slowest Truck
iTrader: (19)
 
Joined: Apr 2004
Posts: 17,863
Likes: 2
From: Hackensack, NJ
Default

Originally Posted by 2001c3driver
OK- I think the conclusion here is a new BCM. B4 a new one I think I may have helped this one along to the grave by replacing the stock fog lights with some aftermarket units as the stockers were getting busted up all the time due to their positions. Can anyone substantiate that?
I'm not familiar with the circuit...is there a separate relay for the fog lights or does it go directly through the BCM? If the relay is internal to the BCM and the aftermarket fog lights draw more current, they may have been the demise of your current BCM...just a theory.
Reply
Old Nov 28, 2008 | 11:59 AM
  #15  
Mark Johnson's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,728
Likes: 29
From: Santa Fe New Mexico
Default

Exactly what I'm thinkin'. At any rate I'm gonna wire'em in stand alone as I don't wanna jeopordize another BCM..............
Reply
Old Dec 5, 2008 | 10:06 AM
  #16  
Mark Johnson's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,728
Likes: 29
From: Santa Fe New Mexico
Default

OK- beating this horse one more time; The chimer still chimes when ya lave the ket in the ignition engine off and open the door................
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
99bluefirebird
GM Parts Classifieds
4
Sep 17, 2015 08:05 PM
MA$TER_E
Tuning, Diagnostics, Electronics, and Wiring
5
Sep 9, 2015 03:14 PM
Mark_k
GMT 900 Trucks General Discussion
5
Sep 7, 2015 10:15 PM
screaminian47
New Members
9
Sep 7, 2015 08:20 PM
xerox17
GM Drivetrain & Suspension
1
Sep 5, 2015 01:23 PM




All times are GMT -5. The time now is 06:33 PM.