GMT 800 & Older GM General Discussion 2006 & Older Trucks | General Discussion

Body Control Module..........

Thread Tools
 
Search this Thread
 
Old Nov 22, 2008 | 11:29 AM
  #1  
Mark Johnson's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,728
Likes: 29
From: Santa Fe New Mexico
Default Body Control Module..........

Well guys, I need one. Where can I get one for a good price- and anyone know the part#? It's for a 201 Sierra 1500 4x4 with LM7 5.3 V8. THanks.............
Reply
Old Nov 22, 2008 | 01:53 PM
  #2  
dewmanshu's Avatar
Moderately Differentiated
20 Year Member
Liked
iTrader: (4)
 
Joined: Nov 2004
Posts: 27,563
Likes: 3
From: Maryland
Default

PM Torque_Wrench, he'll probably get to you on Monday. I do believe you'll need to have it flashed by a Tech II as well.
Reply
Old Nov 23, 2008 | 10:32 AM
  #3  
Mark Johnson's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,728
Likes: 29
From: Santa Fe New Mexico
Default

Thanks Dew- I just sent'em one...........
Reply
Old Nov 23, 2008 | 03:57 PM
  #4  
budhayes3's Avatar
PT's Slowest Truck
iTrader: (19)
 
Joined: Apr 2004
Posts: 17,863
Likes: 2
From: Hackensack, NJ
Default

What happened to your BCM?
Reply
Old Nov 24, 2008 | 08:39 AM
  #5  
Mark Johnson's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,728
Likes: 29
From: Santa Fe New Mexico
Default

Originally Posted by budhayes3
What happened to your BCM?
Fog lightd son't wortk and lights don't chime when ya turn off the engine with the lights still on and the radio/ clock light and grear selector won't dim with the dash lights. I already replaced the headlight switch with no changes. Could there be another cause..........
Reply
Old Nov 24, 2008 | 08:45 AM
  #6  
dewmanshu's Avatar
Moderately Differentiated
20 Year Member
Liked
iTrader: (4)
 
Joined: Nov 2004
Posts: 27,563
Likes: 3
From: Maryland
Default

FWIW, check the grounds on the BCM, make sure it is not corroded at all. They will start acting up if they don't have a good solid ground.
Reply
Old Nov 24, 2008 | 09:13 AM
  #7  
chevrolet all the way's Avatar
TECH Addict
iTrader: (24)
 
Joined: Jun 2008
Posts: 2,615
Likes: 0
From: trussville alabama
Default

Originally Posted by 2001c3driver
Fog lightd son't wortk and lights don't chime when ya turn off the engine with the lights still on and the radio/ clock light and grear selector won't dim with the dash lights. I already replaced the headlight switch with no changes. Could there be another cause..........
wher you ing when you started this post??
Reply
Old Nov 24, 2008 | 10:00 AM
  #8  
Mark Johnson's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,728
Likes: 29
From: Santa Fe New Mexico
Default

Originally Posted by chevrolet all the way
wher you ing when you started this post??
Cute. No- keyboard was acting up, got a new one. 10-4 Dew, I'll check the grounds. anything out of the ordinary I should look for? Or could simply unplugging and replugging it back in do OK..................
Reply
Old Nov 24, 2008 | 11:33 PM
  #9  
budhayes3's Avatar
PT's Slowest Truck
iTrader: (19)
 
Joined: Apr 2004
Posts: 17,863
Likes: 2
From: Hackensack, NJ
Default

Good advice from Dewey, I'd also take a good look at the wiring and connector to the headlight switch and make sure the pin fitment is good and that there's no signs of arching.
Reply
Old Nov 25, 2008 | 01:32 PM
  #10  
Mark Johnson's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,728
Likes: 29
From: Santa Fe New Mexico
Default

Thanks guys- I'll check all that out. Oh yeah- where's it located? I think I've seen it when I peered under the dash beneath the steering wheel but wanna be sure..............
Reply



All times are GMT -5. The time now is 12:07 AM.