WTT: Front Mount Turbo kit for N/A parts...
#1
Thread Starter
TECH Enthusiast
iTrader: (26)
Joined: Aug 2010
Posts: 577
Likes: 0
From: Manitowoc Wi.
Im wanting to go back and run N/A on my 04 Silverado 2wd since it will be my daily driver. This is a Homemade kit and is nice quality, all the welds are perfect. I ran this kit at 12psi for 10,000 miles and have had zero issues with it on my 4.8l. Best the truck put down was 475/463 to the wheels through a 4L80E. Im swapping in a 5.3l since the 4.8l has over 200,000 miles on it and started having bottom end issues. I figured it's a good time to switch back to N/A.
***** Will sell this kit outright for $2150 plus shipping so you have a comparison on price
The Front Mount Turbo kit consists of:
72mm on3 Turbo
4" downpipe with Wideband O2 bung
Flipped/Modified Factory Manifold complete with Crossover.
750hp Front Mount Intercooler and all the Cold side piping
Tial Blow off Valve
Precision waste gate
IAT sensor already in cold side piping
Oil lines
I also have a Low mileage Ls6 Cam I could throw in and Might be willing to trade my 52lb. LS3 injectors for a set of 42lb 8.1l injectors.
100% ready to bolt on all you will need is a fuel pump and Injectors and a Tune.
Im looking for:
Long tube headers with Y pipe Complete Preferably Stainless or Ceramic Coated.
243/799 heads complete
Nice cam for 5.3 228 duration or lower
Complete CAI or modded stock factory air box
A set of gears 3:73 or 4:10's with possibly a TruTrac or similar
PM me or text me for fastest response 507-215-20 Five Two
We can talk details through PM or by text. I have some pictures of the kit installed on my phone so I can text or email them.
***** Will sell this kit outright for $2150 plus shipping so you have a comparison on price
The Front Mount Turbo kit consists of:
72mm on3 Turbo
4" downpipe with Wideband O2 bung
Flipped/Modified Factory Manifold complete with Crossover.
750hp Front Mount Intercooler and all the Cold side piping
Tial Blow off Valve
Precision waste gate
IAT sensor already in cold side piping
Oil lines
I also have a Low mileage Ls6 Cam I could throw in and Might be willing to trade my 52lb. LS3 injectors for a set of 42lb 8.1l injectors.
100% ready to bolt on all you will need is a fuel pump and Injectors and a Tune.
Im looking for:
Long tube headers with Y pipe Complete Preferably Stainless or Ceramic Coated.
243/799 heads complete
Nice cam for 5.3 228 duration or lower
Complete CAI or modded stock factory air box
A set of gears 3:73 or 4:10's with possibly a TruTrac or similar
PM me or text me for fastest response 507-215-20 Five Two
We can talk details through PM or by text. I have some pictures of the kit installed on my phone so I can text or email them.
Last edited by Bigschwerm; Dec 16, 2013 at 05:36 PM.
#4
I have some stainless OBX longtubes and y-pipe with resonators, milled 243s, Volant CAI, tr224 cam, and 3.73s. What kind of deal would you be thinking about with those parts to trade?
I also have some 8.1L injectors
I also have some 8.1L injectors
Thread
Thread Starter
Forum
Replies
Last Post
Choda
MULTIMEDIA (truck related)
12
Jan 22, 2026 02:03 PM
5.3lSilverado
GM Engine & Exhaust Performance
25
Aug 29, 2016 12:48 AM



