Here's another one for you 6.0 swap guys.

The 6.0 that's in the heavier trucks has a different flexplate and a crank spacer to help the snout of the 4l80e match up better. Anyone have these laying around?

 

Look at www.hotrodlane.cc they sell what you need at about the same price you get at the dealer with a buddy working behind the counter.Look at page 60 of their catalog.

 

Do u need to use the 6.0 flex plate & spacer if ur going to run a 4l60 or a 4l65e?

 

Negative

 

so u can use one off a 5.3?

 

That would be correct. The 60 and 65e are the same trannies ... just some minor differencies on the inside. The 80e is different all together.

 

Affirmative

 

To run a 4L80E you need to run a flat HD type flexplate with a spacer and longer bolts.You also need a different nuetual switch,a modified crossmember,a different mount,a different dipstick with tube,wiring for a VSR input plug and programming for the transmission.

 

thanks,,,,,,sorry for the hi jack!