Thinking of parting out the truck and doing something different. What I will include in this kit is all the key ensential components to get you started. Fuel system and tune is about all you will need to finish it out. Details below

Trickperformance log mani, stainless DP & crossover with WB 02 bung welded into DP. DP was been wrapped with DEI header wrap.

MP T76 turbo .68AR exhaust housing

Tial 38mm wastegate (5psi,12psi,&15psi springs comes with, Tial 50mm BOV

a/a 24x12x4 Intercooler. will include all intercooler piping from turbo to intercooler from intercooler to TB and all silicone couplers and clamps. Will also incude MSD IAT sensor. The Intercooler piping from the intercooler to TB has a flange welded on for BOV and a bung for the IAT sensor.

4"/3" exhaust reducer, 4" alumidized piping to 4" stainless Magnaflow race series muffler dumped before rear axle

EdgeProducts siemens 60# injectors with EV1 style connector

PLX wideband gauge & autometer C2 manual boost gauge.

I will include misc stuff required to finish product. Feed oil line to turbo including adapter from WJMmark for the oil feed line. all fittings and adapter for -8 oil drain to oil pan. turbonetics manual boost controller and a solenoid I used from leftovers from my sts kit for high and low setting. stainless steel bolts,washers, nuts to bolt turbo to flange, stainless steel bolts,washer,nuts to bolt crossover piping to log mani. Turbo blanket for turbo. Any vaccum hoses for the BOV and wastgate. I can include the plastic elblow and 4" silicone coupler I used to enable me to utilize the stock air box. I am sure this is a few things I am leaving out.

All items are still on the truck. I never drive it cause I am a over the road truck driver and only home on the weekends and have a different vehicle I drive when I am in town. I say between the turbo and the hot piping it prob has maybe 1500miles on them. I can remove all stuff in one day over a weekend I am in town. Just gonna leave it on there till it sells if it does.
5k and split shipping on everything. Email me cause it would be easier and quicker for me then to reply to pm. Just leave you screen name in the email. Its wildcatstom1234@yahoo.com Thanks again

 

Or best reasonable offer

 

gl on sale

 

2k for the turbo and hot pipes???

 

Not really looking to part out as of yet. I can do everything listed for 4k shipped

 

4k is a good price man....76mm is sweet! i wish i was in the running for a front mount right now...damn N/A set up.

good luck with the sale man!

 

Thanks! This should go quick. Already had a dozen PM's