Slightly built 6.0
Mar 11, 2012 | 09:16 AM
#1
Slightly built 6.0
For sale is my Fuel injected 6.0 which started life as a '03 LQ4 with 90K miles
Short block is stock, pistons, rods, crank
Just this month I installed a freshened up set of cathedral port 799 heads off a '08 truck to bump the compression up to 10.5:1 (higher than a LQ9)
New FelPro MLS head gaskets,
ARP head bolts
Comp Cam .617/.605 225/230 Dur.
Patriot gold .650 valve springs with titanium retainers, 7 degr. locks
Comp hardened 7.4 pushrods
32 lb. "E85" injectors from flex fuel 5.3
Stock truck intake, throttle body, rails
Tune by Klug Performance, Horsepower guessed at 475+
Comes with ECM, and Wiring harness, ready to run, was set up with a 700r4
Can include the front drive accessories if you need them for an extra $150
Starter, and have a complete A/C that's not on it
Don't really want to sell because it's so much fun, but need cash to complete turbo 5.3 build
Watch the attached youtube video, just took it last weekend. My 12 yr. old son took the video. Had more road to keep burning tires, but a car came around the corner and I let off because it was sliding a little bit.
6.0 Burnout - YouTube
$2500 with everything, Don't want to part out but will sell without intake, throttle body etc.
Please make offers by email
Not going to give this away so no low ball offers please.
I am looking for a decent sized turbo, BOV, wastegate that I'd be willing to trade plus $ on your end.
Thanks,
Ryan
Short block is stock, pistons, rods, crank
Just this month I installed a freshened up set of cathedral port 799 heads off a '08 truck to bump the compression up to 10.5:1 (higher than a LQ9)
New FelPro MLS head gaskets,
ARP head bolts
Comp Cam .617/.605 225/230 Dur.
Patriot gold .650 valve springs with titanium retainers, 7 degr. locks
Comp hardened 7.4 pushrods
32 lb. "E85" injectors from flex fuel 5.3
Stock truck intake, throttle body, rails
Tune by Klug Performance, Horsepower guessed at 475+
Comes with ECM, and Wiring harness, ready to run, was set up with a 700r4
Can include the front drive accessories if you need them for an extra $150
Starter, and have a complete A/C that's not on it
Don't really want to sell because it's so much fun, but need cash to complete turbo 5.3 build
Watch the attached youtube video, just took it last weekend. My 12 yr. old son took the video. Had more road to keep burning tires, but a car came around the corner and I let off because it was sliding a little bit.
6.0 Burnout - YouTube
$2500 with everything, Don't want to part out but will sell without intake, throttle body etc.
Please make offers by email
Not going to give this away so no low ball offers please.
I am looking for a decent sized turbo, BOV, wastegate that I'd be willing to trade plus $ on your end.
Thanks,
Ryan
Trending Topics
Mar 19, 2012 | 01:50 PM
#8
engine pic
Heres an early pic before cleaning up the bay if it helps
Motor is still in the truck, if you watched the burn out video from a couple weeks ago, nothing has been added or removed. Performance is awesome. No traction at all!
Removing the back half, going all out race suspension and turbo. I figure this motor would be pretty quick, but with a new rear susp. set up I might as well go all out on the turbo motor.
Motor is still in the truck, if you watched the burn out video from a couple weeks ago, nothing has been added or removed. Performance is awesome. No traction at all!
Removing the back half, going all out race suspension and turbo. I figure this motor would be pretty quick, but with a new rear susp. set up I might as well go all out on the turbo motor.