I bought the stall about three months ago, when i rebuilt my 4L60E. It has about 1,500 miles on it with out any problems. I pulled it out because i toasted the cluches in it. I am putting a 4l80E in it. Therefor the stall will not work.

3,000 stall =450.00 shiped "In most areas"

If anyone is interested. I will be rebuilding my 4l60E and selling it. With the kit that was installed in the tranny it held a stroker motor with a 200 shot well. It shifted real hard without slipping for several of runs. It just couldnt hold the 300 shot. So if anyone is interested in the built tranny let me know.

I am thinking some where around 850.00

Or, if you want the tranny before i rebuild it let me know.

 

IS THAT 850 FOR THE REBUILT? ALSO IS IT A STOCK GM REBUILT 4L60E. AND IF YOU REBUILD IT WHATS GOING IN IT?

 

I CALL FIRST DIBS!
I'm very interested in the tranny, but I would like it built and ready to drop in.
Does that $850 include the stall?
I see you're in cali too, but in the middle...damn...
How much would shipping be to 91316? Let me know because if the shipping is alot, I'll just take a nice cruise up the 5 Gas prices have been going down

 

i GUESS never mind......

 

If you dont sell the TC please PM me, I have some questions and may be interested.

 

So you sprayed thru the Yank?

 

Ya, the yank never gave me a problem. I only had it in the truck about 3 months before it went out. I probably sprayed it with the 200 shot about 10-15 times without a problem. It just couldnt handle the 300 shot. I have several people interested in the tranny though. I believe it is pritty much sold.

sean

 

Will you consider going lower on that yank? A 300 shot is huge...

 

Not yet i have ton of people that are interested in the both of them in a combo. So not just yet. I probably have it both of them sold already.