PerformanceTrucks.net Forums

GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

What fuel pressure should I run?

   
Old Apr 21, 2009 | 02:07 PM
  #1  
Dark Halo's Avatar
Dark Halo
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Aug 2004
Posts: 1,505
Likes: 1
From: Texas
Default What fuel pressure should I run?
I have an edelbrock adjustable FPR and lucas 42.29lb/hr injectors, I know the injectors are a 3 bar injectors but at what psi should I run the regulator?
Reply
0
Old Apr 21, 2009 | 02:16 PM
  #2  
dirt track racer 81's Avatar
dirt track racer 81
TECH Senior Member
iTrader: (45)
 
Joined: Jun 2005
Posts: 9,439
Likes: 13
From: Hennessey, Oklahoma
Default
i have my fp set to 60. i have the same injectors if they are rated at 43.5 psi.. they come out to 58-59 lb injectors
Reply
0
Old Apr 21, 2009 | 02:37 PM
  #3  
Dark Halo's Avatar
Dark Halo
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Aug 2004
Posts: 1,505
Likes: 1
From: Texas
Default
you have been a big help through out this intake swap thanks
Reply
0
Old Apr 21, 2009 | 11:59 PM
  #4  
Dark Halo's Avatar
Dark Halo
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Aug 2004
Posts: 1,505
Likes: 1
From: Texas
Default
Originally Posted by dirt track racer 81
i have my fp set to 60. i have the same injectors if they are rated at 43.5 psi.. they come out to 58-59 lb injectors
will this harm them in the long run?
Reply
0
Old Apr 22, 2009 | 08:11 AM
  #5  
white lightning SS's Avatar
white lightning SS
Launching!
iTrader: (3)
 
Joined: Jul 2005
Posts: 296
Likes: 0
From: Motor City, Michigan
Default
59-60 psi will not cause any issues with the injectors.
Reply
0
Old Apr 22, 2009 | 06:00 PM
  #6  
Dark Halo's Avatar
Dark Halo
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Aug 2004
Posts: 1,505
Likes: 1
From: Texas
Default
thanks for the help
Reply
0
Old Apr 22, 2009 | 06:19 PM
  #7  
Mangled03gmc's Avatar
Mangled03gmc
Baltimore Whore
20 Year Member
iTrader: (95)
 
Joined: Apr 2004
Posts: 16,820
Likes: 2
From: In a van DOWN BY THE RIVER
Default
Originally Posted by dirt track racer 81
i have my fp set to 60. i have the same injectors if they are rated at 43.5 psi.. they come out to 58-59 lb injectors
This is correct...
Reply
0

Trending Topics

Old Apr 23, 2009 | 09:40 AM
  #8  
TXsilverado's Avatar
TXsilverado
Moderator
20 Year Member
Loved
Liked
Community Favorite
iTrader: (19)
 
Joined: Jan 2005
Posts: 18,364
Likes: 291
From: Humble Texas
Default
is stock 58psi or 60?
Reply
0
Old Apr 23, 2009 | 12:41 PM
  #9  
dirt track racer 81's Avatar
dirt track racer 81
TECH Senior Member
iTrader: (45)
 
Joined: Jun 2005
Posts: 9,439
Likes: 13
From: Hennessey, Oklahoma
Default
stock is 58psi.
Reply
0
Old Apr 23, 2009 | 01:16 PM
  #10  
thunder550's Avatar
thunder550
High on diesel fumes
iTrader: (70)
 
Joined: Mar 2005
Posts: 12,658
Likes: 3
From: Phoenix, AZ
Default
If the injectors are designed for 3 bar I would run them there. I think the spray patterns get distorted when you turn the pressure up higher than designed, plus the lower pressure is easier on the pump.
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 08:55 AM.