Getting closer to turbo!
#1
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,882
Likes: 0
Received 0 Likes
on
0 Posts
Getting closer to turbo!
OK< i have started to collect parts for my STS install on my work/tow/plow truck. it will be driven EVERY!!! day, i have had it for 1 year last week and already have 33,000 miles on it, it had 3 when i got it, 3 not 33, not330 just 3
so far i have gotten
new fuel filter
new tr-6 plugs Gapped to?????????
new tranny filter and fluid >>
new rear end gasket and fluid >> theese two for safe keeping
New Racetronix 44* injectors
Eastside has the HP tunner for my year.
only think im missing is the turbo kit
anything else anyone can think of?
cant wait.
oh yhea, it is a 2500 HD 6.0 4x4 ec
so far i have gotten
new fuel filter
new tr-6 plugs Gapped to?????????
new tranny filter and fluid >>
new rear end gasket and fluid >> theese two for safe keeping
New Racetronix 44* injectors
Eastside has the HP tunner for my year.
only think im missing is the turbo kit
anything else anyone can think of?
cant wait.
oh yhea, it is a 2500 HD 6.0 4x4 ec
#3
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,882
Likes: 0
Received 0 Likes
on
0 Posts
IC will come after the kit is all installed, i need to make sure of fitment.
thanks for all your help jerry.
I have had the rush befor, i had a pair of turbos in my car up till last year, i love it!!
thanks for all your help jerry.
I have had the rush befor, i had a pair of turbos in my car up till last year, i love it!!
#6
might look into some wires.. maybe Taylors or MSD 8.5's
and an in-line or tank high flow fuel pump to match those injectors.
since your truck is pretty new, i would think you can skip valve springs... and yes, Intercooler is a must(along with a boost controller)
and an in-line or tank high flow fuel pump to match those injectors.
since your truck is pretty new, i would think you can skip valve springs... and yes, Intercooler is a must(along with a boost controller)
Trending Topics
#8
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,882
Likes: 0
Received 0 Likes
on
0 Posts
i dont think a pump will be needed with 4-5 psi, and the springs should be ok for a while without over reving it.
the wires are going to be new but stock, the stock wires have less resistance. funny, but they do, i tested them, msd, accel. i didnt test taylor tho.
steve, if you are ready in the next 2-3 weeks, im sure i can get you a great deal. pm me if your ready.
the wires are going to be new but stock, the stock wires have less resistance. funny, but they do, i tested them, msd, accel. i didnt test taylor tho.
steve, if you are ready in the next 2-3 weeks, im sure i can get you a great deal. pm me if your ready.
Thread
Thread Starter
Forum
Replies
Last Post
lxcoupe
FORCED INDUCTION
7
09-06-2017 08:24 AM