GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

dynos or 1/4 times for rcsb with 6.0 swap

Thread Tools
 
Search this Thread
 
Old Mar 14, 2005 | 06:45 PM
  #1  
ZL1camaro's Avatar
Thread Starter
On The Tree
 
Joined: Mar 2004
Posts: 104
Likes: 0
Default dynos or 1/4 times for rcsb with 6.0 swap

Just curious of what a shortbed would do with the 6.0.
Reply
Old Mar 14, 2005 | 06:49 PM
  #2  
L-EATER's Avatar
11 Second Truck Club
iTrader: (2)
 
Joined: Jan 2002
Posts: 1,412
Likes: 1
From: Missouri
Default

Mine went 13.30 at 101 with a stock '01 model 6 liter and the Whipple at about 7psi. This was with no headers, through the cats, stock stall, etc. I would say the blower was helping roughly a second and about 10 mph. So mid to low 14's I would guess depending on mods.
Reply
Old Mar 14, 2005 | 07:00 PM
  #3  
JJ_TURBO's Avatar
11 Second Truck Club
20 Year Member
iTrader: (8)
 
Joined: Sep 2004
Posts: 532
Likes: 0
From: South Texas
Default

13.41@101
Reply
Old Mar 14, 2005 | 07:06 PM
  #4  
parish8's Avatar
single digit dreamer
iTrader: (6)
 
Joined: Mar 2002
Posts: 9,743
Likes: 2
From: omaha ne
Default

i never made it to the track with just my 6.0 but i did get some good gtech times.

stock 6.0, 3500+stall, stock 4.8 exhaust, tuning, tstat, efans. that got me into the mid 13's. the high stall and 4wd really got me out of the hole hard.
Reply
Old Mar 14, 2005 | 07:13 PM
  #5  
rcsb4.8to6.0's Avatar
Teching In
 
Joined: Oct 2004
Posts: 44
Likes: 0
Default

mine ran a 13.8 @ 99mph with a 2.1 60'. didn't spin just babied it out the hole. and a 16.5 spinning my *** off. need some good tires.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
OHsixLS3
INTERNAL ENGINE MODIFICATIONS
14
Dec 27, 2016 09:30 AM
Jake75
FORCED INDUCTION
11
Jul 22, 2015 09:20 PM
bsn1989
GM Drivetrain & Suspension
0
Jul 16, 2015 08:20 AM
Cowboy17
FORCED INDUCTION
6
Jul 9, 2015 08:22 PM
Cowboy17
New Members
2
Jul 9, 2015 06:18 PM




All times are GMT -5. The time now is 07:15 PM.