Dyno vid
#1
Well here is a short vid of my truck
It's the First rough cut gonna get my friend to do some more work on it yet
Big thanks to horist for helping me out
right click and save as
http://www.transamws6.net/Movies/JIMSKI-UNTUNED.mov
jim
It's the First rough cut gonna get my friend to do some more work on it yet
Big thanks to horist for helping me out
right click and save as
http://www.transamws6.net/Movies/JIMSKI-UNTUNED.mov
jim
#5
Have some bugs to work out yet
it was Pig rich on all the runs at 10.1or so
Also trying to figure out the timing issue in the last run the stutter you hear when i drop a bunch of timing for some reason
I took it out for a drive today feels really nice idles well
I'm really happy for now untill i get some tuning done
it was Pig rich on all the runs at 10.1or so
Also trying to figure out the timing issue in the last run the stutter you hear when i drop a bunch of timing for some reason
I took it out for a drive today feels really nice idles well
I'm really happy for now untill i get some tuning done
#6
TECH Junkie
Joined: Mar 2003
Posts: 3,271
Likes: 0
From: Katy, TX
That **** sounds sweet! Like a combo of Nascar incar cam and a 747 taking off. Where can i get one of those mufflers? And maybe a dual 3" in/ 4" out Y-pipe? Are you going to try a run with the 60E or wait for the 80E? IF you can get traction and keep the front tires on the ground you should by all means be at the top of the fastest truck list in no time.
Jim #1 with a T76
Jim #2 with a T76 hahaha lol.
Jim #1 with a T76
Jim #2 with a T76 hahaha lol.
#7
I got refered to as Canada Jim or Crazy Canuck By Seth
I prefer Crazy Canuck
The exhaust setup is from a local company big straight through deisal muffler and that's it cost me $300 for everything
jim
I prefer Crazy Canuck
The exhaust setup is from a local company big straight through deisal muffler and that's it cost me $300 for everything
jim
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
jscherbs
GM Parts Classifieds
3
Sep 30, 2015 07:54 AM
norris_83
Tuning, Diagnostics, Electronics, and Wiring
0
Sep 9, 2015 04:14 PM



