GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

dyno info! long

Thread Tools
 
Search this Thread
 
Old Feb 8, 2004 | 11:38 AM
  #1  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default dyno info! long

well went to fuel injection specialist yesterday with 02denali,farmtruc,gmcwantsls1,lored,vicred

ok did 11 pulls 9 under load!
first: with stock t/b, poweraid spacer and tornado 232hp
second: stock t/b, poweraid spacer 228
third: stock tb 228 no change without poweraid spacer hahahha
forth: bbk 236
fith: bbk and tornado 240 damn
six thru nine were tunning for fuel trims max hp was 246
tenth: run without load 276 NELSON TUNNING!!
eleventh: run without load stock tunning 251
NELSON TUNNING OVER STOCK TUNNING WAS 25HP NOT BAD AT ALL!

i want to thank fuel injection specialist and farmtruc(allen) for there time and
patience with my parts change outs lol later,kevin
Reply
Old Feb 8, 2004 | 12:12 PM
  #2  
Hit Man X's Avatar
TECH Veteran
 
Joined: Mar 2003
Posts: 4,492
Likes: 0
Default

Yes those damn spacers SUCK!

So you stuck with the BBK with or without that BBK spacer?
Reply
Old Feb 8, 2004 | 12:26 PM
  #3  
F8L Z71's Avatar
12 Second Truck Club
 
Joined: Feb 2002
Posts: 5,575
Likes: 0
From: Sacramento, CA
Default

WOW!!!

Very cool!

Tornados ROCK!! (is this the same damn thing you see on TV?)

Ohh, so does Allen

Makes me wonder what I can run now with his agressive tune in my truck. Thing pulls hard
Reply
Old Feb 8, 2004 | 12:36 PM
  #4  
agreif's Avatar
TECH Fanatic
iTrader: (4)
 
Joined: Jun 2003
Posts: 1,528
Likes: 0
From: Chicago Burbs
Default

Wow, so the 276 is with what? Here's what I pulled from your site.
K/N FIPK, MSD 8.5 SPARK PLUG WIRES, GIBSON SHORTY HEADERS, EATON POSI REAR END 4:10, FLEX-A-LITE ELECT. FANS, NELSON PERFORMANCE TUNNING , 160 POWER STAT., FLOWMASTER 40 SERIES EXHAUST, ASP UNDER DRIVE PULLEY, NGKTR55IX SPARK PLUGS
Reply
Old Feb 8, 2004 | 02:14 PM
  #5  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default

HIT MAN X with the bbk spacer
F8LPONY yes thats the one from tv lol hey it works so it stayed on dyno doesnt lie right?
AGREIF yea everything you see there plus bbk 80mm t/b and TORNADO
Reply
Old Feb 8, 2004 | 03:26 PM
  #6  
FarmTruc's Avatar
Performance Trucks Sponsor
iTrader: (5)
 
Joined: Jul 2002
Posts: 1,439
Likes: 0
From: san antonio, tx
Default

Hey v8, like always it was a great time.

Just so you guys know, we were pulling on a true loaded dyno, a Mustang Dyno. It's nothing like those inertia only dyno's. This dyno feels completely different and actually takes into consideration weight, load, etc.

Even those this dyno can simulate a real world dyno pull and a non-loaded, inertia, dyno, the numbers are still a little skewed when you try to simulate.

Not bad gains v8, see ya next time,

allen
Reply
Old Feb 8, 2004 | 05:27 PM
  #7  
Moderator
 
Joined: Feb 2002
Posts: 1,908
Likes: 0
From: Clyde, California
Default

So a Tornado made 4 rwhp! I've always been told they were snake oil like the TB spacers, now we know the spacers are at least. How much torque did the Tornado make?
Jim
Reply
Old Feb 8, 2004 | 05:31 PM
  #8  
F8L Z71's Avatar
12 Second Truck Club
 
Joined: Feb 2002
Posts: 5,575
Likes: 0
From: Sacramento, CA
Default

Was there a big difference in IATs betwen the 2nd and 3rd runs or whereever you could measure the diff. with the Tornado? Just curious.
Reply
Old Feb 8, 2004 | 06:28 PM
  #9  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default

y2k silverado it gained 3 more lbs of tq with the tornado
f8lpony nope as far as i can tell. had the tornado on first then within 5 mins we did the other so i dont know about iat but i dought it runs were to close to see a dif. later,kevin
Reply
Old Feb 8, 2004 | 08:53 PM
  #10  
GMChasLS1's Avatar
Launching!
iTrader: (1)
 
Joined: Sep 2003
Posts: 249
Likes: 0
From: San Marcos Texas
Default

Hey that was a fun time! Glad to see some hard numbers on the parts you tested Kevin!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GXPJAY
Trucks and SUV Classifieds
5
Feb 13, 2022 08:15 AM
dselby25
FORCED INDUCTION
17
Aug 24, 2015 07:26 PM
echoman
GMT 800 & Older GM General Discussion
2
Aug 22, 2015 01:53 PM
mrhino
GMT 800 & Older GM General Discussion
2
Aug 7, 2015 10:01 AM
gtyler04
Trucks and SUV Classifieds
0
Jul 28, 2015 06:21 PM




All times are GMT -5. The time now is 01:58 AM.