PerformanceTrucks.net Forums

GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

DBW intake the same as cable operated?

Thread Tools
 
Search this Thread
 
Old Dec 5, 2008 | 08:16 AM
  #1  
1936 LS1's Avatar
1936 LS1
Thread Starter
Launching!
iTrader: (10)
 
Joined: Oct 2008
Posts: 215
Likes: 0
From: Mississippi Gulf Coast (Katrina Zone!)
Default DBW intake the same as cable operated?
I need an intake but I already have a DBW TB. Are the earlier intakes physically identical?
Reply
0
Old Dec 5, 2008 | 11:49 AM
  #2  
budhayes3's Avatar
budhayes3
PT's Slowest Truck
iTrader: (19)
 
Joined: Apr 2004
Posts: 17,863
Likes: 2
From: Hackensack, NJ
Default
The intakes and bolt patterns are the same.
Reply
0
Old Dec 5, 2008 | 12:28 PM
  #3  
1936 LS1's Avatar
1936 LS1
Thread Starter
Launching!
iTrader: (10)
 
Joined: Oct 2008
Posts: 215
Likes: 0
From: Mississippi Gulf Coast (Katrina Zone!)
Default
Thanks. I didn't want to buy an older one and not have it work with my DBW throttle body.
Reply
0
Old Dec 5, 2008 | 12:31 PM
  #4  
00ChevyScott's Avatar
00ChevyScott
Wearin' da big hat
iTrader: (10)
 
Joined: Jan 2008
Posts: 10,262
Likes: 9
From: Over There
Default
only difference is mounting plates for cable TB and cover, and the fuel system is different, but those can be swapped between all of the truck intakes.
Reply
0
Old Dec 5, 2008 | 02:11 PM
  #5  
bluecajun5.3's Avatar
bluecajun5.3
11 Second Truck Club
20 Year Member
iTrader: (31)
 
Joined: Jan 2005
Posts: 5,861
Likes: 0
From: Breaux Bridge, LA
Default
they are different.
on a dbw intake there is a nipple on the intake to hook up the hose that comes from the passenger valve cover. on a cable intake there is no nipple so it goes to the tb.
Reply
0
Old Dec 5, 2008 | 02:49 PM
  #6  
1936 LS1's Avatar
1936 LS1
Thread Starter
Launching!
iTrader: (10)
 
Joined: Oct 2008
Posts: 215
Likes: 0
From: Mississippi Gulf Coast (Katrina Zone!)
Default
Thank you, BlueCajun. I'll try to get one that's for a DBW setup to avoid any problems. That should be '03 and up, correct?
Reply
0
Old Dec 5, 2008 | 03:12 PM
  #7  
budhayes3's Avatar
budhayes3
PT's Slowest Truck
iTrader: (19)
 
Joined: Apr 2004
Posts: 17,863
Likes: 2
From: Hackensack, NJ
Default
Oh crap, sorry man, I was sure they were the same, my bad
Reply
0

Trending Topics

Old Dec 5, 2008 | 03:15 PM
  #8  
1936 LS1's Avatar
1936 LS1
Thread Starter
Launching!
iTrader: (10)
 
Joined: Oct 2008
Posts: 215
Likes: 0
From: Mississippi Gulf Coast (Katrina Zone!)
Default
Originally Posted by budhayes3
Oh crap, sorry man, I was sure they were the same, my bad
No problem. That's why I asked it here on the forum. So many people with different knowledge!!
Reply
0
Old Dec 5, 2008 | 03:32 PM
  #9  
bluecajun5.3's Avatar
bluecajun5.3
11 Second Truck Club
20 Year Member
iTrader: (31)
 
Joined: Jan 2005
Posts: 5,861
Likes: 0
From: Breaux Bridge, LA
Default
Originally Posted by 1936 LS1
Thank you, BlueCajun. I'll try to get one that's for a DBW setup to avoid any problems. That should be '03 and up, correct?
no problem.
99-02 has a cable tb and 03 and up has dbw.
Reply
0
Old Dec 5, 2008 | 06:15 PM
  #10  
1Bear's Avatar
1Bear
TECH Fanatic
iTrader: (1)
 
Joined: Aug 2006
Posts: 1,410
Likes: 8
From: Jones Creek, Texas
Default
Originally Posted by bluecajun5.3
no problem.
99-02 has a cable tb and 03 and up has dbw.
That's the straight up easiest way to get the right one, unless you get one from any of the earlier trucks that came with traction control, Denali's or Escalade's that also had DBW throttle bodies before '03.
Reply
0



Advanced Search

All times are GMT -5. The time now is 08:16 AM.