Cam guru's....Critique this cam for my 6.2
#1
TECH Apprentice
Thread Starter
Cam guru's....Critique this cam for my 6.2
Duration at .050" is 214/218
Lift is .552" intake and exhaust with 1.7 ratio
Lobe separation 113 with 109 intake centerline
This will be going into my denali with at most a 2800-3000 stall.
I am curious cuz i read that the 6.2 heads like a duration split of about 10. So i was thinking something like a 216/226 duration and this recommendation is surprising but im no expert.
Thoughts?
Lift is .552" intake and exhaust with 1.7 ratio
Lobe separation 113 with 109 intake centerline
This will be going into my denali with at most a 2800-3000 stall.
I am curious cuz i read that the 6.2 heads like a duration split of about 10. So i was thinking something like a 216/226 duration and this recommendation is surprising but im no expert.
Thoughts?
#3
TECH Apprentice
Thread Starter
Interesting! Do have a link to this test or is it a post on here that i can search? I would love to read about it.
Gobs of torque you say? Just what my heavy pig needs more of!
Gobs of torque you say? Just what my heavy pig needs more of!
#4
TECH Apprentice
Thread Starter
This is the test i believe madmann26 was referring to for anyone else that may want to read up on it....
Rectangle vs Cathedral Port Cam Test - CPG Nation
Rectangle vs Cathedral Port Cam Test - CPG Nation
Thread
Thread Starter
Forum
Replies
Last Post
silverz28camaro
GM Engine & Exhaust Performance
9
09-07-2012 10:39 PM
brady346
GM Engine & Exhaust Performance
14
10-01-2007 12:16 AM
Pro Stock John
SHOW & SHINE DISCUSSION
20
05-05-2003 06:51 AM