!@#!# 4l60
Feb 15, 2004 | 11:58 PM
#12
Thread Starter
11 Second Club
Joined: Jul 2002
Posts: 1,424
Likes: 0
From: Beaver Falls, PA
Originally Posted by 01 Thunder
they might have the epc turned up to high and once you turn it up there is no turning it back down.
this was the problem i was having with my other trans shop.
damn idiots didnt knoew what they where doing.
finally bit the bullit after 9 transmissions, and took it elswheres where i found out that there was stuff that was sopposed to be in there.
I was told that they had installed a transgo Hd shift kit, when the other trans shop tore it apart there was no transgo in there.
so thtas where i am now gathering up my parts and evidance to take them to court.
If you can talk to another shop that builds hotrod transmissions. and get their opinion.
this is what i had to do.
apparantly something is not right.
unless your putting out over 500HP.
these 4L60E's wont handle much more over that.
this was the problem i was having with my other trans shop.
damn idiots didnt knoew what they where doing.
finally bit the bullit after 9 transmissions, and took it elswheres where i found out that there was stuff that was sopposed to be in there.
I was told that they had installed a transgo Hd shift kit, when the other trans shop tore it apart there was no transgo in there.
so thtas where i am now gathering up my parts and evidance to take them to court.
If you can talk to another shop that builds hotrod transmissions. and get their opinion.
this is what i had to do.
apparantly something is not right.
unless your putting out over 500HP.
these 4L60E's wont handle much more over that.
i am guessing that epc is electronic pressure control or something toward that effect?
i will be calling carl rossler and level ten amongst others tomorrow for suggestions as well.
Feb 16, 2004 | 12:25 AM
#14
Thread Starter
11 Second Club
Joined: Jul 2002
Posts: 1,424
Likes: 0
From: Beaver Falls, PA
Originally Posted by Chingon
Muahahahahah
Feb 16, 2004 | 12:25 AM
#15
yeah these 4l60E wont handle to well with that much horsepower.
If someone tells you other wise their lying. you might want to look at swapping over to a 4L80E.
they will handle much more than the 60e's will.
If someone tells you other wise their lying. you might want to look at swapping over to a 4L80E.
they will handle much more than the 60e's will.
Feb 16, 2004 | 12:26 AM
#16
Thread Starter
11 Second Club
Joined: Jul 2002
Posts: 1,424
Likes: 0
From: Beaver Falls, PA
Originally Posted by 01 Thunder
yeah these 4l60E wont handle to well with that much horsepower.
If someone tells you other wise their lying. you might want to look at swapping over to a 4L80E.
they will handle much more than the 60e's will.
If someone tells you other wise their lying. you might want to look at swapping over to a 4L80E.
they will handle much more than the 60e's will.
Feb 16, 2004 | 12:41 AM
#19
13 Second Truck Club
iTrader: (1)
Joined: Mar 2003
Posts: 4,094
Likes: 1
From: Pueblo de Nuestra Señora la Reina de los Ángeles de la Porciúncula
Originally Posted by Texas Terminator
**** off dipshit. don't be a dick all your life. also, don't be jealous that i have the power to break things and you don't. go stir up **** with slowverado instead, he's much more fun to pick on.
Why shouldn't be a dick? I got so much more life left
Unlike you old man
You remind me of Slowverado (as sad as that is) when you say I'm jealous of your trucks HP. It must be a texas thing...
