Is 400 for a front and rear resonable? If your interested pm me

 

If your gonna do a 30 in the front it'll be best to get a high pinion one..When lower gears are put in the 30's the pinion is stupid small and can break..In the HP30 the reverse cut of the gear makes it a bit stronger than the LP30..

You could get a HP44,there driver drop.....
I just hate to see you spend all that $$ on a 10b front..

What axles??

 

Thanks bumpers!

I finally found a guy that has a housing laying around.. Got it with 3rd member w/4.10s for $50..
And my buddy gave me a toy Rear with 4.10s already in it.

Then that threw me off,, i almost had a NP243 but its a Driverside drop.. TOY axles are passenger side diffs.. So i got to searching and found a NP241 out of a older suburban with Passenger side drop for $200..

Just gonna get some good birfields and get to it.

Thanks for your help also Andrew!!
He was looking for some Toyota axles for me..


Now all i gotta get is a SYE for the 241.. Still gonna come out cheaper cause the adapter for the NP205 is $700,, ill have $500 in the 241 with the SYE.

 

Would it be easier to buy the adapter for the d300 vs modding the 241??

 

Id have to find a d300 first. And the adapter for that is 538 i think. Novak is where i saw it at.
241 bolts right up and i think a sye would be my best bet.

 

just tryin to remind ya. I would like to get some pics if you dont mind asking. Sent you my number also

 

Found a set of axles and the guy happened to have a set of yj springs. Soon as i get the transfer case and rebuild this trans the fun will begin.
Bought a truetrac, lockrite, front axle rebuild kit, and rear wheel bearings and seals. I hope to have it up and goin by july.

 

I gave my buddy your number but he prolly forgot about it.. Don't look like you need them now haha..

 

Ha thanks bumpers!
I was lookin on craigslist friday before i left work and just searched for yj springs and found a listing. Guy lived 3 miles from my work. He had these toy axles and all kinda jeep stuff. So i lucked up and made a one stop shop.
Cant wait to get it goin now, should be pretty fun.
Found out a 65 mustang radiator fits perfect, even with the steering box inboard on the frame.