Sent my 4L60E to TransBuilderGuy
#202
I dont follow him on the facebox. Truck still holds power so whatever. I'm going to tow the side by side and a few dirtbikes a few hours away, so if you see a rzr towing a trailer with dirtbikes and and black z71 on the side of the road toss me a beer.
#203
working on a theory with the 4l60e, but I picked up a 4l80e and transfer case form a 02 6.0 HD for $100. let the parts list begin.
Frost wire harness 250
Deep pan and filter
Converter
flexplate
Cross member
Yoke / drive shaft? I read some people cut the yoke and bevel the edge
Speed sensor?
re tune obviously.
ill have a 80 gone trough and fresh-end up and see what it needs.
Frost wire harness 250
Deep pan and filter
Converter
flexplate
Cross member
Yoke / drive shaft? I read some people cut the yoke and bevel the edge
Speed sensor?
re tune obviously.
ill have a 80 gone trough and fresh-end up and see what it needs.
#204
My Theory was wrong. Going to my trans guy Tuesday and awaiting a call back from trans builder guy. Updating this to keep a record for my self.
Went to tow 2k is lbs this weekend and the trans wasn't having it. I made it 20 mins into my 2hr trip, trans temp got up to 218 so I pulled over and let it cool. In 8 mins it dropped form 218 to 173.
Running the stock cooler and a tru cool 40k cooler.
On my way back it threw a P0741 code, if its anything to major I'll pull it off the road and get the beater out until I can get time and parts for the 80e
Went to tow 2k is lbs this weekend and the trans wasn't having it. I made it 20 mins into my 2hr trip, trans temp got up to 218 so I pulled over and let it cool. In 8 mins it dropped form 218 to 173.
Running the stock cooler and a tru cool 40k cooler.
On my way back it threw a P0741 code, if its anything to major I'll pull it off the road and get the beater out until I can get time and parts for the 80e
#205
#206
Transbuilerguy has a page, there is a few performance truck pages also but unsure what one the drama is on.
Went for a ride with my trans guy but didn't tell him about the truck at all. his eyes got wide when he was set back in the seat trying to read the scanner.
as stated it shows full lock up, but when it surges the TCC is showing some slippage. I talked to transbuiler guy and I'm going to have my guy call him.
Went for a ride with my trans guy but didn't tell him about the truck at all. his eyes got wide when he was set back in the seat trying to read the scanner.
as stated it shows full lock up, but when it surges the TCC is showing some slippage. I talked to transbuiler guy and I'm going to have my guy call him.
#207
Transbuilerguy has a page, there is a few performance truck pages also but unsure what one the drama is on.
Went for a ride with my trans guy but didn't tell him about the truck at all. his eyes got wide when he was set back in the seat trying to read the scanner.
as stated it shows full lock up, but when it surges the TCC is showing some slippage. I talked to transbuiler guy and I'm going to have my guy call him.
Went for a ride with my trans guy but didn't tell him about the truck at all. his eyes got wide when he was set back in the seat trying to read the scanner.
as stated it shows full lock up, but when it surges the TCC is showing some slippage. I talked to transbuiler guy and I'm going to have my guy call him.
#208
Transbuilerguy has a page, there is a few performance truck pages also but unsure what one the drama is on.
Went for a ride with my trans guy but didn't tell him about the truck at all. his eyes got wide when he was set back in the seat trying to read the scanner.
as stated it shows full lock up, but when it surges the TCC is showing some slippage. I talked to transbuiler guy and I'm going to have my guy call him.
Went for a ride with my trans guy but didn't tell him about the truck at all. his eyes got wide when he was set back in the seat trying to read the scanner.
as stated it shows full lock up, but when it surges the TCC is showing some slippage. I talked to transbuiler guy and I'm going to have my guy call him.
#210
I'll give ya that if your all blown and/ or tuboed- but behind a swapped in stock LQ9 at 5000+ ft the 4L60 should live...………..






