well i just lowered my 00 silverado 4wd with keys in the front and remover the blocks and did shackles in the rear i went to do the alignment and i cant get the caster/camber anywhere near what it needs to be im at -1.7 on both sides right now does wnyone make adjustable control arms or a camber kit for these trucks did some searching but no luck any help would be appreciated thanks

 

DJM makes 3 inch drop lower control arms. Wish I had known that when I had to replace my lcas before it would pass inspection.

 

I did drop spindles in conjunction with drop keys on my 99 4wd silvy and was able to get the wheels aligned without a problem or complaint from the shop. My blocks are removed from the rear as well.

 

i wish i could say the same im maxed out with my alignment and i cant even get the alignment close im guessing they dont make an upper control arm or anything to help with alignment?

 

DJM does make an upper control arm kit to help with alignment.

 

i called and they said they only make an upper control arm for 2wd trucks?

 

That's really weird, because I know Black04 is running some DJM UCAs on his 4wd.