GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

lost every gear! help!

Thread Tools
 
Search this Thread
 
Old Jan 26, 2012 | 10:59 AM
  #1  
kciSS05's Avatar
Thread Starter
Staging Lane
iTrader: (3)
 
Joined: Mar 2009
Posts: 99
Likes: 0
From: b.h,MI
Default lost every gear! help!

Here it is. Got an 05 silvo ss. 3200 circle d. Transgo hd2. Vett servos. Those mods have been in my truck for about year and a half two years. Last night driving from a stop sign. Truck gets to 25mph and looses every gear! Towed it to local trans shop. First thing they said it smelled like burnt fluid! I race my truck proly 6 to 7 times a year. Don't know what it could be plllzzzz help! Doubt I would mess my trans up just cruzing down the road! I do have nx on my truck so do you think it could be my stall? Or fuse? Or tranny computer? Idk! Hahahaha Any input would help thanks!
Reply
Old Jan 26, 2012 | 11:00 AM
  #2  
kciSS05's Avatar
Thread Starter
Staging Lane
iTrader: (3)
 
Joined: Mar 2009
Posts: 99
Likes: 0
From: b.h,MI
Default

Tranny also has 87,000 miles on it
Reply
Old Jan 26, 2012 | 11:07 AM
  #3  
Atomic's Avatar
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default

A trans failure shouldnt be suprising...
Reply
Old Jan 26, 2012 | 11:14 AM
  #4  
kciSS05's Avatar
Thread Starter
Staging Lane
iTrader: (3)
 
Joined: Mar 2009
Posts: 99
Likes: 0
From: b.h,MI
Default

Well it is to me hahaha. I'm not a trans guy so I only now the basics nothing to indepth
Reply
Old Jan 26, 2012 | 11:28 AM
  #5  
Atomic's Avatar
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default

Its only suprising because the 60e, even with a shift kit, has a history of failure in heavy trucks and any more power than stock.
Reply
Old Jan 26, 2012 | 02:47 PM
  #6  
lukn4trbl355's Avatar
TECH Enthusiast
iTrader: (2)
 
Joined: Aug 2010
Posts: 741
Likes: 1
From: Gurnee, IL
Default

as for the tranny computer, im pretty sure yours is built into your ecu, then again im unfamilar with that year. my guess would be the sunshell or somethin in the valvebody sticking not allowing it to shift/ have gears but im no trans expert, hopefully some member thats familar with trannys could help
Reply
Old Jan 26, 2012 | 02:54 PM
  #7  
06Sierra2's Avatar
TECH Fanatic
 
Joined: Feb 2010
Posts: 1,245
Likes: 0
From: el paso, tx
Default

drain the fluid and look at it, if you smelled it, you can prolly see it as well. pull the pan and look for gold!
Reply
Old Jan 26, 2012 | 03:16 PM
  #8  
kciSS05's Avatar
Thread Starter
Staging Lane
iTrader: (3)
 
Joined: Mar 2009
Posts: 99
Likes: 0
From: b.h,MI
Default

Thanks for the input guys. Keep them coming waiting for my truck to get home via tow truck! Hahaha
Reply
Old Jan 26, 2012 | 03:20 PM
  #9  
ChevyTruck's Avatar
something else
iTrader: (39)
 
Joined: Jun 2008
Posts: 3,726
Likes: 1
From: Newark, DE
Default

I think it's blown. The 60E stock suck with little power over stock. I know that you have the 224 cam in that truck.

Last edited by ChevyTruck; Jan 26, 2012 at 04:27 PM.
Reply
Old Jan 26, 2012 | 03:27 PM
  #10  
kciSS05's Avatar
Thread Starter
Staging Lane
iTrader: (3)
 
Joined: Mar 2009
Posts: 99
Likes: 0
From: b.h,MI
Default

Hahaha thanks chevytruck! That cam has done me good but its about to get yanked after I get my trans up and going again! And yea I just find it hard to believe that without the tranny even being warm and me just starting my truck and only going 25mph that it would take a ****...but I guess stranger **** has happened haha.
Reply



All times are GMT -5. The time now is 03:40 AM.