Bigschwerm

iTrader: (26)

Just had my Level 2 4l60e (had it built locally with 65e parts and the rest of the best) and a 10" Midwest 3600 triple disc stall put in yesterday.

Truck is so much more fun to drive now....night and day difference! It had a tight 2600 stall prior to this and was decent but now it free revs right into the powerband quick and the shift extensions are great.

Just thought Id give my feed back for future members looking for a stall.

2007chevy5.3l

iTrader: (21)

I bet that is fun! I can get my little 3200 to go up to 3400 and it feels sweet. Almost makes me want to get a higher stall sometimes

OUT2WIN

iTrader: (1)

Locally they want $3700 to build mine. They are a local shop that has no reputation. I'm interested in getting a little more info on your build.

LS1TRUCKGUY

iTrader: (7)

Bigschwerm

iTrader: (26)

In your case i would go with a board sponsor. $3700 is way to much IMO. I had 65e hard parts, Full transgo HD2 kit, Transgo Plate, all billet servos, kevlar wide band, and the rest of the best along with the shops secrets they learned over the years building these done for $2700 installed with a sweet warranty. Minus the cost of the stall i bought off of tech, the stall was originally speced for a car so it is looser than a 3600 in my truck, like 3800/3900 ish.

Bigschwerm

iTrader: (26)

It is a blast so much more fun to drive now. The stall was originally speced for a car so it loose in my truck, acts like a 3800/3900ish stall.

Rhino79

iTrader: (7)

Sweet man!

Bigschwerm

iTrader: (26)

Update: Gets a little squirrely on wet roads with the high stall on take off going to be a handful when the roads get icy.