I'm installing a Vette Servo in my trucks Tranny Howlong does it usually take??

 

probably about a half hour.... maybe a little moe if you've never done it.

Here's a pretty good write up.
http://www.gmfullsize.com/Tech%20Pag...ServoTech.html

 

Make sure the big snap-ring goes into the SECOND GROOVE when you re-install it....screw this up and you'll need a new tranny !!!!!

 

Second Groove What??? Never did a lot of Tranny work...

 

Read this post here. There's an outer grove, then a little farther in there's a second grove for the retaining clip that holds the whole piston assembly in place. Make sure it goes in the grove that's farther into the case, otherwise things will not pressurize correctly and parts will break.

 

Does any one have an exploded view of this because i'm now considering selling the Servo due to the fact that if i mess up I'm screwed....I looked at both links in the thread and am now more lost than when i started...

 

Servo is in and tranny is shifting propperly... No problems....

 

good deal, got it in the second groove, right? Its not that hard, but if you didnt know about it you wouldnt think to even check it.