PerformanceTrucks.net Forums

GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

99-07 4WD Front Coilover Conversion

   
Old May 13, 2014 | 05:02 PM
  #141  
EGrippe77's Avatar
EGrippe77
Teching In
 
Joined: May 2013
Posts: 38
Likes: 0
From: Arlington, TX
Default
With factory control arms and spindles can I get 3 inches of drop with just the coilover conversion?
Reply
0
Old May 13, 2014 | 06:55 PM
  #142  
Atomic's Avatar
Atomic
Thread Starter
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default
Yea, I would say so! What does your current setup measure from the center of the wheel straight up to the top of the fender well?
Reply
0
Old May 13, 2014 | 08:38 PM
  #143  
EGrippe77's Avatar
EGrippe77
Teching In
 
Joined: May 2013
Posts: 38
Likes: 0
From: Arlington, TX
Default
Looks like it's 22" from the center of the wheel to the fender lip.
Reply
0
Old May 13, 2014 | 08:55 PM
  #144  
Atomic's Avatar
Atomic
Thread Starter
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default
You have a tahoe? The fender is a bit different than the trucks. A tahoe guy with my kit is sitting at roughly 16" right now, so there is plenty of room for what you want.
Reply
0
Old May 13, 2014 | 10:04 PM
  #145  
EGrippe77's Avatar
EGrippe77
Teching In
 
Joined: May 2013
Posts: 38
Likes: 0
From: Arlington, TX
Default
So I should be able to get the ride height I want with the Pro-Comp shock adapter and not have to mess with the stud mount?
Reply
0
Old May 13, 2014 | 10:38 PM
  #146  
Atomic's Avatar
Atomic
Thread Starter
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default
Correct. If you take a measurement from the lower shock bolt to the upper shock hoop thing i can tell you what springs and shocks youll need.
Reply
0
Old May 19, 2014 | 02:34 PM
  #147  
EGrippe77's Avatar
EGrippe77
Teching In
 
Joined: May 2013
Posts: 38
Likes: 0
From: Arlington, TX
Default
Could you tell me what shocks and springs I will need in the rear also to achieve a 5 inch drop? If so what measurements do you need?
Reply
0
Old May 19, 2014 | 02:35 PM
  #148  
EGrippe77's Avatar
EGrippe77
Teching In
 
Joined: May 2013
Posts: 38
Likes: 0
From: Arlington, TX
Default
I will get measurements tonight.
Reply
0
Old May 19, 2014 | 08:14 PM
  #149  
Atomic's Avatar
Atomic
Thread Starter
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default
Im afraid i cant comment at all on the tahoe rear setups, dont know much about them. You can try the tahoe forums though.
Reply
0
Old May 20, 2014 | 01:19 PM
  #150  
MaddogJP's Avatar
MaddogJP
Registered User
 
Joined: May 2014
Posts: 1
Likes: 0
Default
Has anyone tried a airbag setup with this conversion?
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 12:04 AM.