So I was wondering if there is a way to put a 6L80E in a 03 SSS AWD or has someone done this yet. I ask because I heard that they are a nice trans. So if you can lead me in the right direction that would be great... Thanks in advance

 

Here is alot of reading info for you, are you 2wd or 4wd?
https://www.performancetrucks.net/fo...4+to+m6+thread

 

I think he might have been talking about the new 6 speed autos. If that is the case Speartech has done a swap into an older truck. They used the old computer to keep the gauges and some other stuff happy while running the new engine/trans with the new computers. It wasn't a straight forward type of deal but, has been done.

I bet something similiar could be done in a SS but, you would have to change the reluctor wheel on the crank to a 58x one and probably some other stuff that I don't know about.

 

OOOHHHHhhhhhh........ thanks

 

I have an 03 SSS AWD. And thanks I will read it..

 

are you looking for a 6sp auto, that thread is about 6sp manual

 

Is there one for an auto??

 

This is the Speartech swap https://www.performancetrucks.net/fo...d.php?t=401899

The limiting factor in your truck will be your 24x reluctor wheel.



And still no one makes a stand alone controller for the 6l80/90.

 

Check out TCI's new 4L80E to a 6 speed conversion with paddle shifters!

http://video.aol.com/video-detail/tc...008/3845253249

 

I can't figure out why they would turn a 4L80E into a 6 speed. Doesn't seem like the 6L80E would require the same programming to get the system to work like they have. Am I missing something?