I am thinking about going with a radix on my truck. I know the usual stuff like udp and what not has to be changed but would I be ok with my head package? I know it would work better with a different cam also. And what would I expect as far as gains go?

 

No opinions???

 

Heads and cam look good, you can always swap cams later. UDP has to go, as you mentioned. Your heads/exhaust will work very well with the SC, your measured Boost will be lower but you'll make better power due to the much improved exhausting.

DOIT!!

 

How much boost could I run safely

 

depends on your tuning capabilities. I ran 11lbs with the 112 on my 5.3L with methanol injection. General opinion is 10lbs is about max safe with meth and spot-on tune. Startt slow and build up. With your heads and exhaust you will need a very small pulley, remember, Boost pressure is measured in the manifold after the valve event, it is a measure of wasted energy.

 

I don't plan on running any meth at all. Not trying to push it just wanna make good power. What you think it will make overall on 7 lbs?

 

changing to a lower stall,bigger injectors and fuel pump

 

Plan on doin inline walbro but injectors should be alright seeing that I'm barely at 60% duty cycle right now and I'm not changing my stall again. Lol

 

Pin the crank pulley when you do the swap.

 

What is your compression?