i will be running a stock truck intake and fuel rails..
408ci
pt88 or gt91 front mount
2) walbro 255's

and were is the best place to buy them

 

a member on here sells plug-n-play, direct fits that average over 70#'s...at least mine did...

 

yeah i would bet 60's with meth would work. Thats what i ended up with and plan on making big power

 

you can get the plug n play 60s off ebay too.

 

They offer the high impediance 80#'s now. Thats what I am switching too on my boosted 6L E85. Thats a 92# injector @ 58psi FP FYI. PM me and I can send you there link who sells these since there no a sponsor on here

 

i will not be running meth

 

so they don't make a 80# or bigger in a injector that doesn't require spacing the fuel rails up?

 

fuel rail spacing is super easy. And IMO you need to look into meth

 

why is meth so important...
i have never ran it... IMO its only a band-aid
i am building a fun street truck and i think Meth is only one more thing to go wrong... and also if i can't make 800+rwhp with a 408ci LS motor and a 88 or 91mm turbo on 93 octane i will sell it and go back to ford because i made 700+rwhp with a 331ci modular motor and a 76mm turbo on 93 octane....

why is it SO important on these chevy's to run meth to make any power?