I am running NGK TR6 plugs that I stupidly did not gap before I put them in, So I am going to take them out and gap them but wht should they be gaped to?

I have heard of some turbo guys running a smaller gap and some running a larger one. Mods are in my sig if needed.

Thanks,
Shane

 

i'd gap them about .032-.035"

 

Isn't the stock gap on a TR6 .035? I think you will be fine at that.

 

Just replaced my tr6's and everyone of them was .035 out of the box.

 

Thanks for the help guys. Ill just make sure they are all around .035

 

my tr6's were gapped at 45-50 out of the box......not sure why but i put them on .032 cause I was having blowout problems on 7 psi..... That solved that issue!