some 90mm Radix TB conversion..........thoughts
Apr 19, 2006 | 07:47 AM
#21
Originally Posted by JimS
Which injectors and where are they available? ... yeah I know 
pigtails and spacers needed for our trucks.
Apr 19, 2006 | 07:47 AM
#22
Originally Posted by dewmanshu
holt, I say if your duty cycle isn't fixable within some proper ve and maf tuning(again, getting that 2bar will change all of that) this mod will surely put injectors on your list of needed mods. MOre air=more fuel. I am just not sure you should be sufferning from injector duty cycle woes. It's not like you are pushing 600hp on that radix and stock 6.0.
Richard, you will be letting us know when the complete kits are availabe? do you have a timeline for completion? Also, a complete listing of what is included with the kit and price? thanks!
Apr 19, 2006 | 08:38 AM
#23
O.K. I have had the 90 in for a few months now and there is no to very slight drop in AIT's. Is anyone monitoring their intake temps before and after. I know ambient changes so to rule out bias, what is the difference from your before and after 90 mod based on the spread from ambient to AIT's?
EXAMPLE: on a 60* day with a warm engine, I see AIT's in the high 90's to low 100's cruising at 50mph. These were the SAME prior to the 90 conversion
I have done various logs showing that there was minimal drop in AIT's either cruising or WOT blasts. I have not added any timing or further tuning for the 90MM TB. Anyone else?
EXAMPLE: on a 60* day with a warm engine, I see AIT's in the high 90's to low 100's cruising at 50mph. These were the SAME prior to the 90 conversion
I have done various logs showing that there was minimal drop in AIT's either cruising or WOT blasts. I have not added any timing or further tuning for the 90MM TB. Anyone else?
Last edited by krambo; Apr 19, 2006 at 01:49 PM.
Apr 19, 2006 | 08:14 PM
#25
Originally Posted by Order 66
Any pics of this mod?
post #94
Apr 19, 2006 | 10:57 PM
#26
Originally Posted by Holty
yes, i agree. if i can't get my inj duty cycle under control, then this mod is on the back burner. i just wanted to call and get on the "list" so when the complete kit is available, i'll be "first in line".
Richard, you will be letting us know when the complete kits are availabe? do you have a timeline for completion? Also, a complete listing of what is included with the kit and price? thanks!
Richard, you will be letting us know when the complete kits are availabe? do you have a timeline for completion? Also, a complete listing of what is included with the kit and price? thanks!
Richard
Thread
Thread Starter
Forum
Replies
Last Post
