Maggie dealers
Mar 23, 2015 | 05:21 PM
#1
Thread Starter
TECH Enthusiast
Joined: Jan 2003
Posts: 589
Likes: 0
From: Queens, NY
Maggie dealers
Thinking of going 1900 or more likely a 2300 on the heavy pig.
Checked with blackbear, in the past I know leftcoast32, blown chevy, and someone else were all dealers.
Just trying to weigh my options. Since I've been watching the past few months with nothing used for square ports heads is popping up so I guess I'm going new.
Of course the joy of it all is with 120k I might as well do springs, if I do springs I might as well swap the cam. My muffler is rattling so I might as well do a catback, if I do a catback I might as well stop by Nick at ARH and get some headers (this pig was meant to be the test fit vehicle way back when it had the paxton on it).
Checked with blackbear, in the past I know leftcoast32, blown chevy, and someone else were all dealers.
Just trying to weigh my options. Since I've been watching the past few months with nothing used for square ports heads is popping up so I guess I'm going new.
Of course the joy of it all is with 120k I might as well do springs, if I do springs I might as well swap the cam. My muffler is rattling so I might as well do a catback, if I do a catback I might as well stop by Nick at ARH and get some headers (this pig was meant to be the test fit vehicle way back when it had the paxton on it).
Mar 23, 2015 | 07:37 PM
#2
Thinking of going 1900 or more likely a 2300 on the heavy pig.
Checked with blackbear, in the past I know leftcoast32, blown chevy, and someone else were all dealers.
Just trying to weigh my options. Since I've been watching the past few months with nothing used for square ports heads is popping up so I guess I'm going new.
Of course the joy of it all is with 120k I might as well do springs, if I do springs I might as well swap the cam. My muffler is rattling so I might as well do a catback, if I do a catback I might as well stop by Nick at ARH and get some headers (this pig was meant to be the test fit vehicle way back when it had the paxton on it).
Checked with blackbear, in the past I know leftcoast32, blown chevy, and someone else were all dealers.
Just trying to weigh my options. Since I've been watching the past few months with nothing used for square ports heads is popping up so I guess I'm going new.
Of course the joy of it all is with 120k I might as well do springs, if I do springs I might as well swap the cam. My muffler is rattling so I might as well do a catback, if I do a catback I might as well stop by Nick at ARH and get some headers (this pig was meant to be the test fit vehicle way back when it had the paxton on it).
BlackBear
Mar 30, 2015 | 03:21 PM
#3
Thread Starter
TECH Enthusiast
Joined: Jan 2003
Posts: 589
Likes: 0
From: Queens, NY
Thread
Thread Starter
Forum
Replies
Last Post
Mossyoakglock
GMT 900 Trucks General Discussion
0
Jul 17, 2015 08:30 AM
