FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection

Ls vs Coyote dyno

Thread Tools
 
Search this Thread
 
Old 01-05-2020, 04:52 AM
  #1  
TECH Junkie
Thread Starter
 
ZO6Ted's Avatar
 
Join Date: Jan 2007
Location: Arlington, TX
Posts: 3,295
Received 252 Likes on 164 Posts
Default Ls vs Coyote dyno

This is 10 months old but on the engine dyno at Westech a 427 with Procharger made 1785.6 and 1422.6 with stock head bolts, lifters and rockers. The Coyote made 1307 and 903.1. Both had a 15k budget so corners had to be cut. But 30 lbs of boost on stock head bolts before the Ls blew a head gasket? Coyote busted a timing chain and other crap at 32lbs. They are doing rebuilds and shooting for more!
Old 01-05-2020, 07:16 AM
  #2  
TECH Addict
iTrader: (7)
 
madmann26's Avatar
 
Join Date: Feb 2013
Location: Somewhere north of 285, south of 985.
Posts: 2,987
Received 371 Likes on 299 Posts
Default

I'd like to see the graphs. I'm betting the coyote power is much higher in the RPM range.
Old 01-05-2020, 07:23 AM
  #3  
TECH Junkie
 
dantheman1540's Avatar
 
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,124
Received 766 Likes on 564 Posts
Default

I watched that series a while back. I hope when they redo it they have head bolts this time.
Old 01-05-2020, 08:41 AM
  #4  
TECH Fanatic
 
smokinlmm's Avatar
 
Join Date: Nov 2015
Location: Coastal NC
Posts: 1,761
Received 410 Likes on 321 Posts
Default

I need to start paying attention! I just don't have *** book so I'm in the dark sometimes. Lol...
Old 01-05-2020, 09:19 AM
  #5  
TECH Junkie
 
dantheman1540's Avatar
 
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,124
Received 766 Likes on 564 Posts
Default

Originally Posted by smokinlmm
I need to start paying attention! I just don't have *** book so I'm in the dark sometimes. Lol...
I don't have faceballs or cable so youtube is my lifeline.
The following users liked this post:
arthursc2 (01-05-2020)
Old 01-05-2020, 12:15 PM
  #6  
TECH Junkie
Thread Starter
 
ZO6Ted's Avatar
 
Join Date: Jan 2007
Location: Arlington, TX
Posts: 3,295
Received 252 Likes on 164 Posts
Default

Originally Posted by madmann26
I'd like to see the graphs. I'm betting the coyote power is much higher in the RPM range.
As I recall it was basically 7500 vs 6500 more or less peak. 4.1 hp per ci vs 4.3 on the Coyote
Originally Posted by dantheman1540
I watched that series a while back. I hope when they redo it they have head bolts this time.
I think that's implied to use head bolts next time.
I only do FB for the Grand kids pics and of course my company a bit. It's such a time waster. Guess this can be at times.
Old 01-05-2020, 12:43 PM
  #7  
TECH Fanatic
iTrader: (6)
 
stroker87's Avatar
 
Join Date: Aug 2008
Location: Chicago area
Posts: 1,210
Received 68 Likes on 61 Posts
Default

FB? only the market place to look for go fast goodies!

i have a cousin and a good friend with Coyote's one is spinning it to close to 8k rpm's it screams! like the LS they respond well to mods BUT cost wise repair bills are double for Coyote's! right now my ls3 forged 416 all new brand name parts im around 7k my cousin has a 13 gt500 he's a scared to push that car since to replace his engine is like 15 to 18k for a forged replacement

my friends full bolt'on tune (stock internals) some weight reduction ran 10.79 @ 128mph cut 1.41 60ft with his 13 gt 5.0 was impressive to watch
Old 01-05-2020, 04:40 PM
  #8  
Custm2500's Rude Friend
iTrader: (17)
 
1FastBrick's Avatar
 
Join Date: Apr 2007
Location: JunkYard
Posts: 14,328
Received 761 Likes on 630 Posts
Default

You don't need to be on FakeBook it's on You Tube.

Old 01-05-2020, 06:45 PM
  #9  
TECH Junkie
Thread Starter
 
ZO6Ted's Avatar
 
Join Date: Jan 2007
Location: Arlington, TX
Posts: 3,295
Received 252 Likes on 164 Posts
Default

Originally Posted by stroker87
FB? only the market place to look for go fast goodies!

i have a cousin and a good friend with Coyote's one is spinning it to close to 8k rpm's it screams! like the LS they respond well to mods BUT cost wise repair bills are double for Coyote's! right now my ls3 forged 416 all new brand name parts im around 7k my cousin has a 13 gt500 he's a scared to push that car since to replace his engine is like 15 to 18k for a forged replacement

my friends full bolt'on tune (stock internals) some weight reduction ran 10.79 @ 128mph cut 1.41 60ft with his 13 gt 5.0 was impressive to watch
Impressive!
I actually seriously considered buying a new F150 RCSB 10 speed with Whipple dealer installed but decided against it because of what I've heard on reliability and cost of repair. Sure would be nice though to just buy something that runs with a warranty. It's a business write off anyway. And GM can suck me because we have to buy a 50k truck to get what we want and they don't even make a RCSB anymore much less with the good stuff. Probably keeping my rig or even an earlier model but it's on the back burner now for another year.
Old 01-05-2020, 09:37 PM
  #10  
TECH Fanatic
iTrader: (6)
 
stroker87's Avatar
 
Join Date: Aug 2008
Location: Chicago area
Posts: 1,210
Received 68 Likes on 61 Posts
Default

last month my son was watching youtube showing the Shelby Super Snake F-150 755hp crew cab 2wd (dont like the 4x4 version) with warranty local dealer had one was under sticker but still $81k i was hot for it watching that video found one at a local dealer but it sold before i got there, next morning i came to my senses and thought WTF was i thinking lol but nothing left to do to it tinted window, bed rug, bed cover, rims i mean really nothing to add or change unless you like popboys chrome lol

i told my wife i want to upgrade my 06 f350 crew cab flatbed drw diesel to maybe a 13 or so f250 crew cab swb once i do that trade our suv in on a new c8 since the kids dont hang out with us much any more and a f250 single wheel would be more driver friendly for her on days on in the c8 she said i need to give up my c5 zo6 not sure i can part with that car just yet.....

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nonnieselman
INTERNAL ENGINE MODIFICATIONS
33
08-09-2012 12:52 PM
teamblackandred
GM Engine & Exhaust Performance
2
11-08-2010 05:50 PM
moes04silverado
GM Engine & Exhaust Performance
21
04-25-2006 11:14 AM



Quick Reply: Ls vs Coyote dyno



All times are GMT -5. The time now is 09:19 PM.