FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

Boosted guys with spray step inside

Thread Tools
 
Search this Thread
 
Old Sep 12, 2008 | 05:55 PM
  #1  
WJ MARK's Avatar
Thread Starter
12 Second Truck Club
iTrader: (7)
 
Joined: Jun 2006
Posts: 2,093
Likes: 0
From: colorado above 6000 ft.
Default Boosted guys with spray step inside

Just curious how big a shot some of you are spraying with how much boost. Also are you stock block or forged. Im starting out small 35 shot with 10-12 psi. Then I'll step it up down the road.
Reply
Old Sep 12, 2008 | 06:00 PM
  #2  
Spoolin's Avatar
GFYS and STFU
iTrader: (8)
 
Joined: Jan 2007
Posts: 13,870
Likes: 4
From: Here and sometimes there too.
Default

trever1t is at 75 shot on stock motor and 10 psi
Jonathan is on a 50 shot on stock motor at 6 psi
Dewey is on a 75 shot on stock motor at 11 psi
KYSilverado is on a 75 shot on stock motor at 12 psi
can't think of anyone else right now, looking back some of the boost might be off.
Reply
Old Sep 12, 2008 | 06:05 PM
  #3  
WJ MARK's Avatar
Thread Starter
12 Second Truck Club
iTrader: (7)
 
Joined: Jun 2006
Posts: 2,093
Likes: 0
From: colorado above 6000 ft.
Default

sweet! Im gonna run a 150 just to be cooler than everyone, lol. j/k
Reply
Old Sep 12, 2008 | 06:10 PM
  #4  
trever1t's Avatar
2nd fastest 5.3 ECSB
iTrader: (14)
 
Joined: Oct 2005
Posts: 26,690
Likes: 1
From: NorCal
Default

Spoolin's keepin' a freaking list....

Yes, how may I be of service? 75 shot with a max recorded manifold pressure of 182.2kPa. Stock engine with exception of the cam, rods and springs. everyday I hear new noises ....but she is hangin' on.
Reply
Old Sep 12, 2008 | 06:39 PM
  #5  
454SuperSport's Avatar
TECH Fanatic
 
Joined: Jul 2002
Posts: 1,011
Likes: 0
From: Millen, GA
Default

i ran my whippled truck at 6 pounds and a 50 shot and a few times at 9 psi and a 50 shot
Reply
Old Sep 12, 2008 | 07:08 PM
  #6  
brobradh77's Avatar
TECH Enthusiast
iTrader: (3)
 
Joined: Dec 2006
Posts: 509
Likes: 0
From: Wichita Falls, Texas
Default

I plan on runnin a 50 shot under 8#'s soon.
Reply
Old Sep 12, 2008 | 07:20 PM
  #7  
2004SSS's Avatar
TECH Addict
iTrader: (25)
 
Joined: Dec 2004
Posts: 2,913
Likes: 0
From: southern california
Default

125 shot on 15 psi . forged 370 motor with forged crank .
Reply
Old Sep 12, 2008 | 07:23 PM
  #8  
Bill Reid's Avatar
Moderator
iTrader: (14)
 
Joined: Mar 2003
Posts: 2,327
Likes: 1
From: Chandler, AZ
Default

Originally Posted by WJ MARK
Just curious how big a shot some of you are spraying with how much boost. Also are you stock block or forged. Im starting out small 35 shot with 10-12 psi. Then I'll step it up down the road.
Start saving for a short block... the addiction never ends ...
Reply
Old Sep 12, 2008 | 08:32 PM
  #9  
TrickTurbo's Avatar
Truck Sponsor
iTrader: (12)
 
Joined: Sep 2006
Posts: 4,466
Likes: 62
From: Wichita Falls Tx.
Default

Originally Posted by WJ MARK
Just curious how big a shot some of you are spraying with how much boost. Also are you stock block or forged. Im starting out small 35 shot with 10-12 psi. Then I'll step it up down the road.
You have the badest *** gauge in the world for controling nitrous and your dicking around with a 35 shot. just playing

Your new toy should be there on Mon. or Tues.
Reply
Old Sep 12, 2008 | 08:44 PM
  #10  
WJ MARK's Avatar
Thread Starter
12 Second Truck Club
iTrader: (7)
 
Joined: Jun 2006
Posts: 2,093
Likes: 0
From: colorado above 6000 ft.
Default

Originally Posted by Bill Reid
Start saving for a short block... the addiction never ends ...
ive had juice on almostm everythjing, i'll take it easy. only blew up the go kart
Reply



All times are GMT -5. The time now is 03:49 AM.