FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

Boost Reading with a 3.2" Pulley

Old Aug 13, 2008 | 11:39 AM
  #1  
leftcoast32's Avatar
Thread Starter
FormerVendor
iTrader: (4)
 
Joined: Aug 2005
Posts: 1,940
Likes: 0
Default Boost Reading with a 3.2" Pulley

Hope you enjoy the pictures!!

QA1 Double Adjustable Shock:



15 psi Boost Reading:



The Engine Compartment:







Some Parking Lot Shots:













Reply
Old Aug 13, 2008 | 12:01 PM
  #2  
BigTex's Avatar
? ? ? ? ? ?
iTrader: (16)
 
Joined: Nov 2001
Posts: 7,126
Likes: 2
From: East of Dallas
Default

That is a beauty. Very nice!

Does that blower have a 1:1 rear drive ratio or overdriven crank pulley?
Reply
Old Aug 13, 2008 | 12:08 PM
  #3  
BlownChevy's Avatar
blownerator
25 Year Member
iTrader: (20)
 
Joined: Mar 1986
Posts: 18,749
Likes: 8
From: Chatsworth, CA
Default

Originally Posted by BigTex
That is a beauty. Very nice!

Does that blower have a 1:1 rear drive ratio or overdriven crank pulley?
Over driven blower and crank
Reply
Old Aug 13, 2008 | 12:15 PM
  #4  
BigTex's Avatar
? ? ? ? ? ?
iTrader: (16)
 
Joined: Nov 2001
Posts: 7,126
Likes: 2
From: East of Dallas
Default

Sweet! Gotta love 15 psi!!!
Reply
Old Aug 13, 2008 | 12:20 PM
  #5  
leftcoast32's Avatar
Thread Starter
FormerVendor
iTrader: (4)
 
Joined: Aug 2005
Posts: 1,940
Likes: 0
Default

Originally Posted by BlownChevy
Over driven blower and crank
I was seeing 17.5 psi with a 3.0 pulley but 109 was getting expensive at $14.00 a gallon right now. I have it at 15 psi on 100 octane right now, I can run 91 octane at this boost level too for long trips.
Reply
Old Aug 13, 2008 | 12:31 PM
  #6  
WorkTruc's Avatar
Launching!
iTrader: (8)
 
Joined: Dec 2006
Posts: 298
Likes: 1
Default

Nice looking. Looking at your gauge shot your OIL PRESSURE looks to be 40 PSI at 4500 RPM which seems really low.
Reply
Old Aug 13, 2008 | 12:55 PM
  #7  
leftcoast32's Avatar
Thread Starter
FormerVendor
iTrader: (4)
 
Joined: Aug 2005
Posts: 1,940
Likes: 0
Default

Originally Posted by WorkTruc
Nice looking. Looking at your gauge shot your OIL PRESSURE looks to be 40 PSI at 4500 RPM which seems really low.
That is what the LS2 oil pumps always do at WOT. This is just a forged 370 LS2 with a stock pump and has been great.
Reply
Old Aug 13, 2008 | 12:59 PM
  #8  
chevrolade's Avatar
TECH Fanatic
iTrader: (22)
 
Joined: Sep 2007
Posts: 1,456
Likes: 0
From: pearsall.tx
Default

Badazz Ss!!did You Have To Measure For Specs On The Qa1's?I NOTICED YOU HAVE THE BFG G-FORCES,DO THEY HOOK?
Reply
Old Aug 13, 2008 | 01:01 PM
  #9  
leftcoast32's Avatar
Thread Starter
FormerVendor
iTrader: (4)
 
Joined: Aug 2005
Posts: 1,940
Likes: 0
Default

Originally Posted by chevrolade
Badazz Ss!!did You Have To Measure For Specs On The Qa1's?
They list the compressed and extended measurements, just put your ride height in the center of that. They are nice because of the adjustments for Compression and Rebound 24 adjustments each..

The KDW's actually hook really good for a street tire!

Last edited by leftcoast32; Aug 13, 2008 at 02:28 PM.
Reply
Old Aug 13, 2008 | 02:24 PM
  #10  
trever1t's Avatar
2nd fastest 5.3 ECSB
iTrader: (14)
 
Joined: Oct 2005
Posts: 26,690
Likes: 1
From: NorCal
Default

Wow, she sure is purty
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:02 AM.