I was looking for a cam for lsa swapped 08 Silverado z71. It has 3.73 gears, 2800rpm converter, longtubes, 3 inch exhaust, ill be making between 12-16lbs of boost. I was looking at this cam 215/232 .609/.599 113+1 TVS Stage 1 would this work well or should I try something else? is there a recommend cam I should try or that would suit me better?

 

Tell us more about the set up. LSA blower, or a complete LSA motor?

If its just the LSA blower, I assume you have adapter plates? 5.3?

 

It's a 5.3, Lsa lower, zl1 lid, 2.5 upper pulley, %10 overdrive crank pulley,(estimating about 12-15lb of boost but not sure lol) 80lb injectors, adapter plates, Olson customs Lsa acc drive kit. Truck has longtubes, 2800 rpm converter, 4l60e tranny, I'll b fabbing a custom 4in intake. 3in exhaust. Going to a Sd tune.

 

I think you over pullied for that 5.3.
Are you 6 rib or 8?

 

Sounds like a good cam. What kind of power are you looking to achieve?

 

2.5" on my LSA Blower 5.3l is 13lbs with a small cam and stock exhaust.

 

low to mid 500s

 

6 rib currently

 

i have longtubes and a 3 inch exhaust. so im sure ill lose a lb or 2 of boost due to that..

 

I assume you have the adapter plates to make the blower work on a 5.3?