2011 5.3 RCSB Intercooler?
Nov 21, 2010 | 02:02 PM
#1
Thread Starter
On The Tree
Joined: Jul 2010
Posts: 117
Likes: 0
From: HOUSTON, TX
2011 5.3 RCSB Intercooler?
I'm going to order a MP T70 Turbo kit from KB Racing, but he hasn't had a chance to fit the cold side to a NNBS yet but he is offering to sell me a IC that he uses with his 99-06 kits. Has anybody had any experience with this yet. Will it work? If not point me in another direction? Thanls
-Patrick-
-Patrick-
Nov 21, 2010 | 07:34 PM
#2
idk if this helps but I ordered a 31x12x4 3inch in/out intercooler from House Of Boost and fit perfect behind my grille. Just had to cut the lower half of the center brace. Grille still has plenty of support so no problems what so ever.
Last edited by Three6GMC; Dec 1, 2010 at 11:22 AM.
Nov 22, 2010 | 09:01 AM
#3
Thread Starter
On The Tree
Joined: Jul 2010
Posts: 117
Likes: 0
From: HOUSTON, TX
What kind of setup are you using that IC with, a KB Racing Turbo Kit? I guess it doesn't really matter though just as long as it fits good on the NNBS. I see your in CC, my company has an apartment for us out there in Portland off 35. We work at all those ship yards on Burelson St. and some of the plants off 37.
Nov 26, 2010 | 01:34 AM
#4
Yeah it was a KB kit but thats long gone now... and yeah live here in CC and work at the Oxy Chem/ Dupont plant in Ingelside. I drive through Portland almost every day (shift work) so if you hear a loud truck with HIDs its prob me lol
Nov 26, 2010 | 01:42 PM
#6
Thread Starter
On The Tree
Joined: Jul 2010
Posts: 117
Likes: 0
From: HOUSTON, TX
If you don't mind me asking, why is the KB kit gone? Were you not happy with it?
Is OxyChem the one covered in RED DUST, I hate going in there, PITA to clean that stuff of off BLACK!
Nov 26, 2010 | 03:45 PM
#7
NO the KB kit was second to none kyle makes some great stuff but the reason i got rid of it was cuz I traded it for a 408, the one im finishing now.
lol oh hell no thats the sherwin plant ours is the one after it and our plant is prob the cleanest plant you will ever go into. Were strict as hell about how clean we keep everything...
lol oh hell no thats the sherwin plant ours is the one after it and our plant is prob the cleanest plant you will ever go into. Were strict as hell about how clean we keep everything...
Trending Topics
Nov 27, 2010 | 04:46 PM
#8
FWIW ... 2010 Silverado Turbo build used this IC ( not my truck)
the intercooler is a VSracing.net intercooler
http://www.vsracing.net/catalog/prod...roducts_id=798
31 x 12 x 3
he just had to trim the backside of the stock grille in a couple of spots ........ I have pics of the IC with grille off .........thinking of a Turbo kit for my 2010 and spotted this build
the intercooler is a VSracing.net intercooler
http://www.vsracing.net/catalog/prod...roducts_id=798
31 x 12 x 3
he just had to trim the backside of the stock grille in a couple of spots ........ I have pics of the IC with grille off .........thinking of a Turbo kit for my 2010 and spotted this build
Last edited by CDN SS; Nov 27, 2010 at 04:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
06 4.8
Tuning, Diagnostics, Electronics, and Wiring
6
Aug 21, 2015 11:33 PM
05GMC4.8
GMT 900 Trucks General Discussion
5
Aug 7, 2015 09:55 PM
2011, 31x12x4, 53, chevy, engine, exit, intercooler, kit, mods, performance, programmer, rcsb, rear, supercharger, turbo
