We are just about finsihed with this 07. Simular to our 08 truck, just super sized.
Waiting parts sometimes just kills time lines but its in the home stretch.

The engine donot know much about it. But this truck has the edelbrock style intake, sheet metal elbow and some nitrous. The truck had a tranny line come loose the day I got, and wow that fluid got everywhere. Its been here for a month and its still dripping in places.

PT88, Customer likes this turbo and has several rides with it on; so we used it again.

This kit is using our standard 2.5 stainless crossover, GEN2 manifold, and a 4" downpipe. We are going to sacrifice a little of inner fender to get this 4" pipe down and under the truck but only a little corner. To get the pipe to route cleanly we had to suck the turbo down a little more then we use to.
. The intercooler is a new set up. 18 x 20 x 3.5 with 3" in and out... Takes up all the room allowed, we had to trim a little off the back side of the bumper was not a big deal...

Here are some phone pics did not have the camera handy.

 

looks sick great work as always

 

Looks good Rick!

 

You could lose an arm in that downpipe!!

 

looks great, i wanna know more

 

Good stuff rick!

 

Arent you supposed to be working on something else rick

 

Looks good, looking forward to hearing how it runs

 

Thanks Guys, we really spend a good amount of time making these kits look like they belong on these trucks.

You are right, there is a camaro suppose to be coming in soon, and the Lightning IC program seems to be doing well, and the lift still is not installed, several intakes need my attention.
Is there something missing. I have a box a REALLY LARGE piping setting here wonder what that was for.

me too, but customers only call if there is a problem. So I do not get to talk to many once the trucks are done. Still waiting on that picture from you.

 

Now who would bring you a brand new Camaro for surgery?